TC-D37SUB-ADIO16-EX-P-UNI - Module carrier Phoenix Contact

Mã sản phẩm: 2924854

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection)

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

For proper use, the specifications of the installation directive (see Downloads) must be observed.

Product type	Module carrier
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics: Air clearances and creepage distances
Insulation	Basic insulation
Overvoltage category	II
Pollution degree	2

Max. permissible current	1 A (Signal/channel)
Nominal voltage U_N	< 30 V DC (Per signal/channel)
Air clearances and creepage distances
Rated insulation voltage	50 V
Rated surge voltage	0.5 kV
Supported controller universal
Suitable I/O card	universal
Supply
Designation	Power module
Note	Power supply via 2904673 TC-MACX-MCR-PTB power supply and error signaling module.
Fuse	2x 2.5 A on PCB, slow-blow (replaceable)
Input voltage	24 V DC
Input voltage range	19.2 V DC ... 30 V DC
Input current	≤ 2 A
Redundant supply	yes, decoupled from diodes
Polarization and surge protection	Yes
Output name	Switching output
Contact type	1 N/C contact (alarm = open)
Maximum switching voltage	50 V DC (0.3 A)
		30 V DC (2 A)
		33 V AC (2 A)

Power supply
Connection method	Screw connection
Stripping length	7 mm
Number of connections	1
Number of positions	6
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Controller level
Connection method	D-SUB pin strip
Number of connections	1
Number of positions	37

Status display	1 x red LED (error)
Status display		2x green LEDs (PWR1 and PWR2)

Width	242 mm
Height	170 mm
Depth	159.5 mm

Flammability rating according to UL 94

Ambient conditions
Degree of protection	IP00
Ambient temperature (operation)	-20 °C ... 60 °C (Please observe module specifications)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Shock	15g, according to IEC 60068-2-27
Vibration (operation)	2g, according to IEC 60068-2-6

ATEX
Identification	 II 3 G Ex nA IIC T4 Gc X
UKCA Ex (UKEX)
Identification	 II 3 G Ex nA IIC T4 Gc
Certificate	PxCIF21UKEX2924854X
UL, USA/Canada
Identification	UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Zone 2, Group IIC