RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - Relay Module Phoenix Contact

Mã sản phẩm: 1148699

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Relay module with Push-in connection, consisting of: relay base with status LED, freewheeling diode and retaining bracket, safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact type: 2 N/O contacts and 2 N/C contacts, input voltage: 24 V DC

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Relay Module
Product family	RIFLINE complete
Operating mode	100% operating factor
Mechanical service life	approx. 10⁷ cycles
B_10d	810000 Cycles (AC15, 250 V / 0.5 A, 1 NO)
		170000 Cycles (AC15; 250 V / 2 A; 1 NO)
		318000 Cycles (DC13, 24 V / 1 A, 1 NO)
		208000 Cycles (DC13, 24 V / 2 A, 1 NO)
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Basic insulation
Insulation		Safe isolation, reinforced insulation and 6 kV between coil and contact circuit and between contacts 11-12 and 13-14, 41-42 to 23-24, 33-34
Overvoltage category	III
Pollution degree	2

Maximum power dissipation for nominal condition	0.41 W
Test voltage (Winding/contact)	4 kV_rms (50 Hz, 1 min., winding/contact)
Test voltage ()	1.5 kV_rms (50 Hz, 1 min., open contact)
Test voltage ()	2.5 kV_rms (50 Hz, 1 min., between contacts: 7, 8 to 9, 10)
Test voltage ()	4 kV_rms (50 Hz, 1 min., between contacts: all others)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC (Input/output)
Rated surge voltage	6 kV (Input/output)
Short-circuit protection device
Current	10 A (RT28-32)
Voltage	500 V (SCPD)
Short-circuit current	1 kA (conditional short-circuit current)

Coil side
Nominal operating voltage U_N	24 V DC
Input voltage range in reference to U_N	See derating diagram
Typical input current at U_N	17 mA
Input power dissipation for U_N	0.4 W
Typical response time	10 ms
Typical release time	15 ms
Coil voltage	24 V DC
Protective circuit	Freewheeling diode
Status display	Yellow LED

Switching
Contact type	2 N/O contacts, 2 N/C contacts
Type of switch contact	Single contact
Drive and function	monostable
Drive (polarity)	polarized
Contact material	AgSnO, hard gold-plated
Maximum switching voltage	250 V AC
Maximum switching voltage		300 V DC
Minimum switching voltage	10 V (5 mA)
Limiting continuous current	6 A
Maximum inrush current	35 A (20 ms)
Min. switching current	5 mA (10 V)
Interrupting rating (ohmic load) max.	144 W (24 V DC)
		100 W (48 V DC)
		75 W (60 V DC)
		55 W (110 V DC)
		50 W (220 V DC)
		1500 VA (250 V AC)
Force-guided contacts in accordance with EN 61810-3	Type A
Utilization category CB Scheme (IEC 60947-5-1)	AC15, 2 A/240 V (N/O contact)
Utilization category CB Scheme (IEC 60947-5-1)		DC13, 2 A/24 V (N/O contact)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
		0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
		0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG	26 ... 16 (solid)
Conductor cross section AWG		26 ... 16 (flexible)

Width	21 mm
Height	96 mm
Depth	67 mm

Flammability rating according to UL 94

V2 (Housing)

Ambient conditions
Degree of protection (Relay base)	IP20 (Relay base)
Degree of protection (Relay)	RT II (Relay)
Degree of protection (Installation location)	IP54 (Installation location)
Ambient temperature (operation)	-40 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m

UKCA
Certificate	UKCA-compliant

All specifications in accordance with the standard
Standards/regulations	IEC 60947-5-1
		IEC 61810-3
Air clearances and creepage distances between the power circuits
Standards/regulations	EN 61810-1