RIF-1-RPT-LDP-24DC/2X21/FG - Relay Module Phoenix Contact

Mã sản phẩm: 2908215

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Pre-assembled relay module with Push-in connection, consisting of: relay base, safety relay with force-guided contacts in accordance with DIN EN 61810-3, plug-in display/interference suppression module, and retaining bracket, contact type: 2 changeover contacts, input voltage: 24 V DC

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Relay Module
Product family	RIFLINE complete
Application	Forcibly guided contacts
Operating mode	100% operating factor
Mechanical service life	approx. 10⁷ cycles
B_10d	600000 Cycles (AC1; 250 V / 6 A; 1 NO)
		900000 Cycles (AC1; 250 V / 3 A; 1 NO)
		1800000 Cycles (AC1; 250 V / 1,5 A; 1 NO)
		300000 Cycles (DC13; 24 V / 3 A; 1 NO)
		1000000 Cycles (DC13; 24 V / 1,5 A; 1 NO)
		3000000 Cycles (DC13; 24 V / 0,75 A; 1 NO)
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Safe isolation between input and output
Insulation		Basic insulation between the changeover contacts
Overvoltage category	III
Pollution degree	2

Maximum power dissipation for nominal condition	0.72 W
Test voltage (Winding/contact)	4 kV_rms (50 Hz, 60 s)
Test voltage ()	1.5 kV_rms (50 Hz, 60 s)
Test voltage (Changeover contact/changeover contact)	2.5 kV_rms (50 Hz, 60 s)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC (Input/output)
Rated surge voltage	6 kV (Input/output)
Rated surge voltage		4 kV (between the changeover contacts)
Short-circuit protection device
Current	10 A (RT28-32)
Voltage	500 V (SCPD)
Short-circuit current	1 kA (conditional short-circuit current)

Coil side
Nominal operating voltage U_N	24 V DC
Input voltage range	20.4 V DC ... 28.8 V DC (20 °C)
Input voltage range in reference to U_N	see diagram
Typical input current at U_N	30 mA
Typical response time	15 ms
Typical release time	10 ms
Coil voltage	24 V DC
Protective circuit	Freewheeling diode
Operating voltage display	Yellow LED

Switching
Contact type	2 changeover contacts, forcibly actuated
Type of switch contact	Single contact
Drive and function	monostable
Drive (polarity)	polarized
Contact material	AgSnO
Maximum switching voltage	250 V AC/DC
Limiting continuous current	6 A
Interrupting rating (ohmic load) max.	144 W (24 V DC)
		58 W (48 V DC)
		54 W (60 V DC)
		55 W (110 V DC)
		55 W (220 V DC)
		1500 VA (250 V AC)
Utilization category CB Scheme (IEC 60947-5-1)	AC15, 3 A/240 V (N/O contact)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
		0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
		0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG	26 ... 16

Width	16 mm
Height	96 mm
Depth	70 mm
Drill hole
Diameter	3.2 mm

Flammability rating according to UL 94

V2 (Housing)

Ambient conditions
Degree of protection (Relay base)	IP20 (Relay base)
Degree of protection (Relay)	RT I (Relay)
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-25 °C ... 85 °C
Altitude	≤ 2000 m

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
UL, USA/Canada
Identification	cULus Listed UL 508
Certificate	NRNT.E172140
Corrosive gas test
Identification	ISA-S71.04. G3 Harsh Group
		EN 60068-2-60

All specifications in accordance with the standard
Standards/regulations	IEC 60947-5-1
		IEC 61810-3
Air clearances and creepage distances between the power circuits
Standards/regulations	DIN EN 60947-5-1