REL-SR- 24DC/2X21/FG - Safety relays Phoenix Contact

Mã sản phẩm: 2908777

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact type: 2 changeover contacts. The requirements for type A in accordance with DIN EN 61810-3 are satisfied if the circuit is designed as 1 N/O contact / 1 N/C contact.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Single relay
Application	Forcibly guided contacts
Operating mode	100% operating factor
Mechanical service life	approx. 10⁷ cycles
B_10d	600000 Cycles (AC1; 250 V / 6 A; 1 NO)
		900000 Cycles (AC1; 250 V / 3 A; 1 NO)
		1800000 Cycles (AC1; 250 V / 1,5 A; 1 NO)
		180000 Cycles (AC15; 250 V / 3 A; 1 NO)
		560000 Cycles (AC15; 250 V / 2 A; 1 NO)
		4600000 Cycles (AC15; 250 V / 0,75 A; 1 NO)
		360000 Cycles (DC13; 24 V / 3 A; 1 NO)
		740000 Cycles (DC13; 24 V / 1,5 A; 1 NO)
		4200000 Cycles (DC13; 24 V / 0,75 A; 1 NO)
Insulation characteristics
Insulation	Safe isolation, reinforced insulation
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Safe isolation, reinforced insulation
Overvoltage category	III
Pollution degree	2

Maximum power dissipation for nominal condition	0.7 W
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage	6 kV

Coil side
Nominal input voltage U_N	24 V DC
Input voltage range	19.2 V DC ... 26.4 V DC
Input voltage range in reference to U_N	see diagram
Typical input current at U_N	29 mA
Typical response time	10 ms
Typical release time	4 ms

Switching
Contact type	2 changeover contacts, forcibly actuated
Type of switch contact	Single contact
Drive and function	monostable
Drive (polarity)	bipolar
Contact material	AgNi
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	15 V
Limiting continuous current	6 A
Maximum inrush current	6 A
Min. switching current	10 mA (5 V)
Interrupting rating (ohmic load) max.	144 W (24 V DC)
		288 W (48 V DC)
		88 W (110 V DC)
		110 W (220 V DC)
		1500 VA (250 V AC)
Switching capacity min.	0.24 W
Switching capacity	2 A (24 V (DC13))
Switching capacity		3 A (230 V (AC15))
Motor load according to UL 508	10 LRA / 0,5 FLA