REL-SR- 24DC/2X1AU/2X2AU/FG - Safety relays Phoenix Contact

Mã sản phẩm: 1158056

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Safety relay with force-guided contacts in accordance with DIN EN 61810-3 (type A), input voltage 24 V DC, with multi-layer gold contact, 2 N/O contacts and 2 N/C contacts

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Single relay
Application	Forcibly guided contacts
Operating mode	100% operating factor
Mechanical service life	approx. 10⁷ cycles
B_10d	810000 Cycles (AC15, 250 V / 0.5 A, 1 NO)
		170000 Cycles (AC15; 250 V / 2 A; 1 NO)
		318000 Cycles (DC13, 24 V / 1 A, 1 NO)
		208000 Cycles (DC13, 24 V / 2 A, 1 NO)
Insulation characteristics
Insulation	Basic insulation
Insulation		Safe isolation, reinforced insulation and 6 KV between the coil and the contact circuit and between the contacts 3-4, 5-6 to 7-8, 9-10
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Basic insulation
Insulation		Safe isolation, reinforced insulation and 6 KV between the coil and the contact circuit and between the contacts 3-4, 5-6 to 7-8, 9-10
Overvoltage category	III
Pollution degree	2

Maximum power dissipation for nominal condition	0.36 W
Test voltage (Winding/contact)	4 kV_rms (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact)	2.5 kV_rms (50 Hz, 1 min., contact/contact)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage	4 kV

Coil side
Nominal input voltage U_N	24 V DC
Input voltage range	19.2 V DC ... 26.4 V DC
Input voltage range in reference to U_N	see diagram
Typical input current at U_N	15 mA
Typical response time	10 ms
Typical release time	5 ms

Switching
Contact type	2 N/O contacts, 2 N/C contacts, force-guided
Type of switch contact	Single contact
Drive and function	monostable
Drive (polarity)	bipolar
Contact material	AgSnO, hard gold-plated
Maximum switching voltage	250 V AC
Maximum switching voltage		300 V DC
Minimum switching voltage	10 V
Limiting continuous current	6 A
Maximum inrush current	35 A (20 ms)
Min. switching current	5 mA (10 V)
Interrupting rating (ohmic load) max.	144 W (24 V DC)
		100 W (48 V DC)
		75 W (60 V DC)
		55 W (110 V DC)
		50 W (220 V DC)
		1500 VA (250 V AC)
Switching capacity	2 A (24 V, DC13)
Switching capacity		3 A (230 V, AC15)
Force-guided contacts in accordance with EN 61810-3	Type A

Connection method

Plug / solder connection

Width	13 mm
Height	24 mm
Depth	40 mm

Ambient conditions
Degree of protection (Relay)	RT II
Degree of protection (Installation location)	IP54 (Installation location)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m