REL-MR- 12DC/21HC - Single relay Phoenix Contact

Mã sản phẩm: 2961309

Plug-in miniature power relay, with power contact for high continuous currents, 1 changeover contact, input voltage 12 V DC

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Product type	Single relay
Set comprises	2967617 PLC-RSC- 12DC/21HC
		2912264 PLC-RSP- 12DC/21HC
		2900290 PLC-RPT- 12DC/21HC
		2987079 PLC-RSP- 24UC/21HC/RW
		2900324 PLC-RPT- 24UC/21HC/RW
		2906224 RIF-1-RPT-LDP-12DC/1X21
		2908500 RIF-1-RSC-LDP-12DC/1X21
Operating mode	100% operating factor
Mechanical service life	3x 10⁷ cycles
Insulation characteristics
Overvoltage category	III
Pollution degree	3

Service life electrical	see diagram
Maximum power dissipation for nominal condition	0.4 W
Test voltage (Winding/contact)	5 kV AC (50 Hz, 1 min., winding/contact)

Coil side
Nominal input voltage U_N	12 V DC
Input voltage range	7.8 V DC ... 28.8 V DC
Input voltage range in reference to U_N	see diagram
Typical input current at U_N	33 mA
Typical response time	7 ms
Typical release time	3 ms
Coil resistance	360 Ω ±10 % (at 20 °C)

Switching
Contact type	1 changeover contact
Type of switch contact	Single contact
Drive and function	monostable
Drive (polarity)	bipolar
Contact material	AgNi
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	12 V (at 10 mA)
Limiting continuous current	16 A
Maximum inrush current	50 A (20 ms)
Min. switching current	10 mA (at 12 V)
Interrupting rating (ohmic load) max.	384 W (at 24 V DC)
		58 W (at 48 V DC)
		48 W (at 60 V DC)
		50 W (at 110 V DC)
		80 W (at 220 V DC)
		4000 VA (for 250 V AC)
Switching capacity	2 A (at 24 V, DC13)
		0.2 A (at 110 V, DC13)
		0.2 A (at 250 V, DC13)
		6 A (at 24 V, AC15)
		6 A (at 120 V, AC15)
		6 A (at 250 V, AC15)
Motor load according to UL 508	1/2 HP, 120 V AC (N/O contact)
		1 HP, 240 V AC (N/O contact)
		1/3 HP, 120 V AC (N/C contact)
		3/4 HP, 240 V AC (N/C contact)
		1/4 HP, 200 ... 250 V AC