PSR-SPP- 24DC/URM4/5X1/2X2 - Extension module Phoenix Contact

Mã sản phẩm: 1442026

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Single-channel or two-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4 PL e in accordance with EN ISO 13849 safe isolation, width: 35 mm, pluggable Push-in terminal block

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety relays
Product family	PSRclassic
Application	Extension module
Mechanical service life	approx. 10⁷ cycles
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Times
Typ. starting time with U_s	< 25 ms (at Us / when controlled via A11/A12)
Typical release time	< 20 ms (at Us / when controlled via A11/A12)
Recovery time	< 1 s

Maximum power dissipation for nominal condition	16.7 W (U_S = 26.4 V, I_L² = 72 A², P_Total max = 1.4 W + 14.4 W)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V
Rated insulation voltage		250 V
Rated surge voltage/insulation	See section “Insulation coordination”

General
Maximum switching frequency	1 Hz
Digital: A11, A12
Description of the input	safety-related
Number of inputs	2
Input voltage range "1" signal	19.2 V ... 26.4 V DC
Max. permissible overall conductor resistance	50 Ω
Protective circuit	Suppressor diode
Current consumption	typ. 39 mA

Relay: Enabling current paths (23/24 ... 63/64)
Output description	2 N/O contacts each in series, safety-related, floating
Number of outputs	5
Contact type	5 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 10 V
Switching voltage		max. 250 V AC
Switching capacity	min. 100 mW
Inrush current	min. 10 mA
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	3 A (AC15)
Switching capacity in accordance with IEC 60947-5-1		5 A (DC13)
Limiting continuous current	6 A (observe derating)
Sq. Total current	72 A² (observe derating)
Switching frequency	max. 1 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	10 A gL/gG
Output fuse		4 A gL/gG (for low-demand applications)
Relay: Signaling current path (71/72)
Output description	2 N/C contacts parallel, non-safety-related, floating
Number of outputs	1
Contact type	1 signaling current path
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
Switching voltage		max. 250 V AC/DC
Switching capacity	min. 50 mW
Inrush current	min. 10 mA
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	1.5 A (AC15)
Switching capacity in accordance with IEC 60947-5-1		5 A (DC13)
Limiting continuous current	6 A
Sq. Total current	36 A²
Switching frequency	max. 1 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	6 A (gL / gG)
Relay: Confirmation current path (11/12)
Output description	2 N/C contacts in series, floating
Number of outputs	1
Contact type	1 confirmation current path
Contact material	AgSnO₂
Switching voltage	max. 250 V AC/DC
Switching voltage		min. 10 V
Switching capacity	min. 100 mW
Inrush current	max. 3 A
Switching capacity in accordance with IEC 60947-5-1	1.5 A (AC15)
Switching capacity in accordance with IEC 60947-5-1		3 A (DC13)
Limiting continuous current	3 A
Sq. Total current	9 A²
Switching frequency	max. 1 Hz
Output fuse	3 A (gL / gG)

Connection technology
pluggable	yes
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG	24 ... 16
Stripping length	8 mm

Operating voltage display

2 x green LED

Width	35 mm
Height	112 mm
Depth	114.5 mm

Housing material

Polyamide

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4 (In conjunction with suitable evaluating device)
Performance level (PL)	e (In conjunction with suitable evaluating device)
Safety data: IEC 61508 - High demand
Designation	The information is only valid if the safety function is requested at least once a year and the confirmation current path is read back using a suitable evaluation device.
Equipment type	Type A
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Probability of a hazardous failure per hour (PFH_D)	1.00 x 10^-9 (3 A DC13; 3 A AC15; 8760 switching cycles/year)
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Equipment type	Type A
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Probability of a hazardous failure on demand (PFD_AVG)	1.48 x 10^-4
Proof test interval	80 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, amplitude 0.15 mm, 2g