PSR-SCP- 24DC/URM4/4X1/2X2/B - Extension module Phoenix Contact

Mã sản phẩm: 2981677

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

1-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, undelayed, Cat. 4, PL e in accordance with EN ISO 13849, plug-in screw terminal blocks, width: 22.5 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety relays
Product family	PSRclassic
Application	Extension module
Mechanical service life	approx. 10⁷ cycles
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3

Maximum power dissipation for nominal condition	1.01 W
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V
Rated surge voltage/insulation	4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).

General
Rated control circuit supply voltage U_S	24 V DC
Voltage range with reference to U_S	0.9 ... 1.1
Rated control supply current I_S	42 mA
Typical response time	10 ms
Typical release time	10 ms
Recovery time	1 s
Protective circuit	Surge protection; Suppressor diode
Status display	Green LED

Contact type	4 enabling current paths
		1 signaling current path
		1 confirmation current path
Contact material	AgSnO₂
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	15 V AC/DC
Limiting continuous current	6 A (N/O contact, DC1/AC1)
Limiting continuous current		3 A (N/C contact)
Maximum inrush current	6 A (N/O contact, DC1/AC1)
Maximum inrush current		3 A (N/C contact)
Inrush current, minimum	25 mA
Sq. Total current	72 A² (I_TH² = I₁² + I₂² + I₃² + I₄²)
Interrupting rating (ohmic load) max.	144 W (24 V DC, τ = 0 ms, N/C contact 61/62: 72 W)
		288 W (48 V DC, τ = 0 ms, N/C contact 61/62: 144 W)
		77 W (110 V DC, τ = 0 ms)
		88 W (220 V DC, τ = 0 ms)
		1500 VA (250 V AC, τ = 0 ms, N/C contact 61/62: 750 VA)
Maximum interrupting rating (inductive load)	48 W (24 V DC, τ = 40 ms)
		40 W (48 V DC, τ = 40 ms)
		35 W (110 V DC, τ = 40 ms)
		33 W (220 V DC, τ = 40 ms)
Switching capacity min.	0.4 W
Switching capacity in accordance with IEC 60947-5-1	5 A (DC13)
Switching capacity in accordance with IEC 60947-5-1		5 A (AC15)
Switching capacity (360/h cycles)	6 A (24 V DC)
Switching capacity (360/h cycles)		5 A (230 V AC)
Switching capacity (3600/h cycles)	3 A (24 V (DC13))
Switching capacity (3600/h cycles)		3 A (230 V (AC15))
Output fuse	10 A gL/gG NEOZED (N/O contact)
Output fuse		4 A gL/gG NEOZED (N/C contact)

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3

Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Housing material

Polyamide

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4 (In conjunction with suitable evaluating device)
Performance level (PL)	e (In conjunction with suitable evaluating device)
Safety data: IEC 61508 - High demand
Designation	The data only applies if the safety function is demanded at least once a year.
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Probability of a hazardous failure per hour (PFH_D)	9.7 x 10^-11 (In conjunction with suitable evaluating device)
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Designation	The data is only valid if the demand rate is no more than once a year.
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Probability of a hazardous failure on demand (PFD_AVG)	1.37 x 10^-4 (In conjunction with suitable evaluating device)
Proof test interval	76 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)