PSR-SCP- 24DC/TS/SDOR4/4X1 - Extension module Phoenix Contact

Mã sản phẩm: 2986096

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

PSR-TRISAFE-M relay output extension module with 4 safe relay output contacts (choice of 4 single-channel or 2 two-channel relay contacts), 4 alarm outputs; up to SIL 3, Cat.4/PLe, SIL 3, EN 50156, plug-in screw connection terminal blocks

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety device
Application	PSR-TRISAFE-M extension module
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage category	III
Pollution degree	2
Times
Response time	max. 50 ms
Recovery time	< 10 s

Maximum power dissipation for nominal condition	3932 mW (up to 40°C ambient temperature, at m = 4, n = 4, I_load = 4 A, I_signal = 50 mA)
Maximum power dissipation for nominal condition		1532 mW (up to 55°C ambient temperature, at m = 4, n = 4, I_load = 1 A, I_signal = 50 mA)
Nominal operating mode	100% operating factor
Interfaces	DIN rail TBUS for connection to the master module, supplied as standard
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage/insulation	4 kV / basic insulation between output contact current paths (13/14, 23/24, 33/34, 43/44); 6 kV / safe isolation, reinforced insulation between output contact current paths (13/14, 23/24, 33/34, 43/44) and the other circuits
Supply
Rated control circuit supply voltage U_S	18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
Rated control circuit supply voltage U_S	24 V DC (Electrical supply via PSR-TBUS)
Rated control supply current I_S	Electrical supply via PSR-TBUS
		74 mA (At 24 V DC, relay outputs set)
		54 mA (At 24 V DC, relay outputs not set)
Protective circuit	Yes, within the scope of the operating voltage limits
Status display	1 x green LED, 1 x red LED

Maximum switching voltage	250 V AC
Maximum switching voltage		24 V DC
Minimum switching voltage	5 V AC/DC
Limiting continuous current	4 A (see derating curve)
Maximum inrush current	6 A
Inrush current, minimum	5 mA
Switching capacity (3600/h cycles)	3 A (230 V (AC 15))
Switching capacity (3600/h cycles)		5 A (24 V (DC13))
Output fuse	6 A gL/gG
Response time	max. 50 ms
Relay
Output description	Relay contacts, safety-related N/O contacts
Number of outputs	4 (Single-channel)
Number of outputs		2 (Two-channel, connected in pairs)
Contact type	4 relay output contacts
Contact material	AgSnO₂ (From HW03) AgCuNi +0.2 ... 0.4 μm Au (up to HW02)
Switching voltage	min. 12 V AC/DC (from HW 03)
		min. 5 V AC/DC (Up to HW02)
		max. 250 V AC/DC
Switching current	min. 3 mA (from HW 03)
Switching current		min. 5 mA (Up to HW02)
Switching capacity	min. 60 mW
Limiting continuous current	4 A (see to derating)
Mechanical service life	10x 10⁶ cycles
Output fuse	6 A (gL / gG)
Output fuse		4 A (gL/gG for low-demand applications)
Status display	4 x green LEDs
Signal
Output description	Digital
Number of outputs	4
Voltage	24 V DC (Supply via A1/A2)
Limiting continuous current	50 mA
Protective circuit	Yes, within the scope of the operating voltage limits
Short-circuit protection	Yes

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque		5 lb_f-in. ... 7 lb_f-in.

Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Color	yellow
Housing material	Polyamide PA non-reinforced

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	1 (1-channel parameterization)
Category		4 (2-channel parameterization)
Performance level (PL)	c (1-channel parameterization)
Performance level (PL)		e (2-channel parameterization)
Safety data: EN 50156
Safety Integrity Level (SIL)	max. 3 (Reference IEC 61508)
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)	1 (1-channel parameterization)
Safety Integrity Level (SIL)		3 (2-channel parameterization)
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)	1 (1-channel parameterization)
Proof test interval	60 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C (see to derating)
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Maximum altitude	max. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")
Max. permissible humidity (storage/transport)	75 % (On average, 85 % occasionally)
Max. permissible relative humidity (operation)	75 % (On average, 85 % occasionally)
Shock (operation)	10g (Δt = 11 ms, three shocks in each space direction)
Shock (operation)		10g (Δt = 16 ms, continuous shock, 1000 shocks in each space direction)
Vibration (operation)	2g
Air pressure (operation)	70 kPa ... 108 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	66 kPa ... 108 kPa (up to 3500 m above sea level)