PSR-PC50-1NO-1DO-24DC-SC - Coupling relay Phoenix Contact

Mã sản phẩm: 2904664

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Coupling relay for SIL 3 low demand applications, couples digital output signals to the periphery, 1 enabling current path, module for F&G applications, test pulse filter, plug-in screw connection, 17.5 mm width

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type	Coupling relay
Product family	PSRmini
Installation location	IP 54
Application	Safe switch on
		Low demand
		Ex
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Times
Typ. starting time with U_s	30 ms (when controlled via A1)
Typical release time	30 ms (when controlled via A1)
Recovery time	1 s

Maximum power dissipation for nominal condition	1.56 W
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage/insulation	6 kV/safe isolation (through protective impedance)
Supply
Rated control circuit supply voltage U_S	20.4 V DC ... 26.4 V DC
Rated control circuit supply voltage U_S	24 V DC -15 % / +10 % (A1/A2)
Rated control supply current I_S	typ. 65 mA (A1/A2)
Inrush current	≤ 200 mA (A1/A2)
Filter time	< 2 ms (Test pulse duration)
Filter time		≥ 100 ms (Test pulse rate)
Diagnostic supply voltage U_D	24 V DC -15 % / +10 % (24V/A2)
Input current at U_D	typ. 15 mA (24V/A2; depending on load M1 +100 mA)
Inrush current at U_D	2.5 A (24V/A2; for 10 µs)
Protective circuit	Overload protection; Suppressor diode

Digital
Number of inputs	3 (Test point for proof test)
Inrush current	200 mA (Inputs TP1, TP2 and TP3)
Current consumption	typ. 20 mA (Input TP1)
		typ. 18 mA (Input TP2)
		typ. 35 mA (Input TP3)

Relay: Enabling current path
Output description	safety-related N/O contacts
Number of outputs	1 (undelayed)
Contact type	1 enabling current path
Contact material	AgNi, gold-flashed
Switching voltage	min. 15 V AC/DC without diagnostics
		min. 20 V AC/DC (with diagnostics)
		max. 250 V AC
		max. 125 V DC
Switching capacity	min. 1.5 W
Inrush current	min. 100 mA
Inrush current		max. 5 A
Max. permissible overall conductor resistance	< 10 Ω (LO/LO' and NI/NI' and load resistance in the event of a short circuit)
Limiting continuous current	5 A
Switching frequency	max. 0.5 Hz
Diagnostic threshold	20 Ω ... 18 kΩ (lower/upper)
Mechanical service life	approx. 5x 10⁷ cycles
Signal
Output description	non-safety-related
Number of outputs	1 (digital)
Voltage	23 V DC
Current	max. 100 mA
Short-circuit protection	no
Output fuse	150 mA fast blow

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3

Status display	Green LED
Operating voltage display	Yellow LED
Error indication	Red LED

Width	17.5 mm
Height	112.2 mm
Depth	114.5 mm

Housing material

Polyamide

Safety data: IEC 61508 - Low demand
Equipment type	Type A
Safety Integrity Level (SIL)	3 (15 % of total SIL)
Safe Failure Fraction (SFF)	99.6 %
MTBF	110.5 Years
λ_SU	849 FIT
λ_SD	4.27 FIT
λ_DU	3.40 FIT
λ_DD	4.21 FIT
Probability of a hazardous failure on demand (PFD_AVG)	1.49 x 10^-4
Probability of a hazardous failure on demand (PFD_AVG)		1.49 x 10^-5 (for proof test interval = 1 year)
Proof test interval	120 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 65 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	2g

ATEX
Identification	 II 3 G Ex nA nC IIC T4 Gc
Certificate	DEMKO 14 ATEX 1284X
IECEx
Identification	Ex nA nC IIC T4 Gc
Certificate	IECEx ULD 14.0003X
UL, USA/Canada
Identification	cULus
Certificate	E140324
UL, USA/Canada
Identification	Class I, Zone 2, AEx nA nC IIC T4 / Ex nA nC IIC Gc T4 X
Identification		Class I, Div. 2, Groups A, B, C, D, T4
Certificate	E360692
DNV
Identification	C, EMC2
Certificate	11253-14 HH
CE
Certificate	CE-compliant