PSR-MM35-1NO-1DO-24DC-SC - Safety device Phoenix Contact

Mã sản phẩm: 1249515

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Safety relay module for sensor-free speed and speed range monitoring up to SIL 3, Cat. 4, PL e, 2-channel evaluation of the rotating field of AC and three-phase motors, plug-in screw terminal block, width: 12.5 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety device
Application	Over-speed safety relay
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage category	II (600 V)
Overvoltage category		III (300 V)
Times
Typical response time	70 ms (For U_sautostart)
Typical response time		70 ms (For U_smanual, monitored start)
Delay time range	0 s ... 2 s ±10 % (Switch-off delay)
Delay time range		0 s ... 10 s ±10 % (Switch-on delay)
Restart time	< 5 s (Boot time)

Maximum power dissipation for nominal condition	3 W (At U_S = 26.4 V, I_L² = 6 A²)
Nominal operating mode	100% operating factor
Interfaces	Without sensor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	300 V (ÜKAT III)
Rated insulation voltage		600 V (ÜKAT II)
Rated surge voltage/insulation	Basic insulation 4 kV between all current paths and housing
		Safe isolation, reinforced insulation 6 kV: between 13/14 and A1/A2, S34, MO
		Safe isolation, reinforced insulation 8 kV: between L1/L2/L3 and A1, A2, S34, MO between L1/L2/L3 and 13/14
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	20.4 V DC ... 26.4 V DC
Rated control circuit supply voltage U_S	24 V DC -15 % / +10 % (provide external protection)
Rated control supply current I_S	46 mA
Power consumption at U_S	1.1 W
Filter time	20 ms (in the event of voltage dips at U_s)
Protective circuit	Surge protection; Suppressor diode

Digital: Digital input
Description of the input	IEC 61131-2 type 1
Number of inputs	1 (Non-safety-related parameterizable acknowledgment input: S34)
Input voltage range "0" signal	0 V DC ... 5 V DC
Input voltage range "1" signal	15 V DC ... 30 V DC
Input current range "0" signal	0 mA ... 0.5 mA
Filter time	20 ms (Test pulse width of low test pulses)
Max. permissible overall conductor resistance	500 Ω (Input and reset circuit at U_S)
Protective circuit	33 V suppressor diode
Current consumption	typ. 3 mA (at 24 V)
Measurement
Input name	Sensor inputs
Number of inputs	3 (Safety-related sensor inputs: L1 , L2 , L3)
Input voltage range "1" signal	90 V AC ... 690 V AC
Precision	± 1 %
Limit frequency	min. 0.5 Hz
Limit frequency		max. 1200 Hz
Current consumption	0.35 mA

Relay: Enabling current path
Output description	2 N/O contacts in series, floating
Number of outputs	1 (safety-related N/O contacts: 13/14)
Contact type	1 enabling current path
Contact material	AgSnO₂
Switching voltage	min. 12 V AC/DC
Switching voltage		max. 250 V AC/DC
Switching capacity	min. 60 mW
Inrush current	min. 3 mA
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	4 A (DC13, 24 V)
Switching capacity in accordance with IEC 60947-5-1		5 A (AC15, 250 V)
Limiting continuous current	6 A
Sq. Total current	36 A² (observe derating)
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	6 A gL/gG
Signal
Output description	PNP
Number of outputs	1 (Non-safety-related signal output: MO)
Voltage	23 V DC (U_S - 1 V)
Current	max. 100 mA
Maximum inrush current	500 mA
Switching frequency	0.5 Hz (ohmic)
Protective circuit	Reverse polarity protection 33 V suppressor diode
Short-circuit protection	Yes

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3
Tightening torque	0.5 Nm ... 0.6 Nm

Status display	1 x green, red LED (OUT)
Operating voltage display	1 x green, red LED (PWR)
Error indication	Red LED, (flashes in the event of short-circuits or overload)

Width	12.5 mm
Height	112.2 mm
Depth	114.5 mm

Housing material

Polyamide

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4
Performance level (PL)	e
Safety data: IEC 61508 - High demand
Equipment type	Type B
Safety Integrity Level (SIL)	3
Probability of a hazardous failure per hour (PFH_D)	5.72 x 10^-9 (4 A DC13, 5 A AC15, 8760 switching cycles/year)
Proof test interval	240 Months
Duration of use	240 Months
Safety Integrity Level (SIL)	3

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, 2g