PSR-ME20-3NO-1NC-24DC-SC-SET35 - Safety relays Phoenix Contact

Mã sản phẩm: 1301404

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Set comprised of 35 safety relays for emergency stops, safety doors, and light grids up to SIL 2, Cat. 3, PL d, 1- or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, 1 signaling current path, US = 24 V DC, plug-in screw terminal block

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety relays
Product family	PSRclassic
Application	Emergency stop
		Safety door
		Light grid
Mechanical service life	approx. 10⁷ cycles
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Times
Typical response time	200 ms (automatic start)
Typical response time		200 ms (manual, monitored start)
Typ. starting time with U_s	200 ms (when controlled via A1)
Typical release time	25 ms (on demand via the sensor circuit)
Typical release time		60 ms (on demand via A1)
Restart time	< 1 s (Boot time)
Recovery time	< 500 ms (following demand of the safety function)

Maximum power dissipation for nominal condition	16.6 W (U_S = 26.4 V, I_L² = 72 A², P_Total max = 2.2 W + 14.4 W)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V
Rated surge voltage/insulation	Basic insulation 4 kV between all output current paths
		Basic insulation 4 kV between all output current paths/logic paths and housing
		Safe isolation, reinforced insulation 6 kV between 250 V load current paths and 24 V logic paths
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	24 V DC -15 % / +10 %
Rated control supply current I_S	typ. 70 mA (at U_S)
Power consumption at U_S	typ. 1.68 W
Inrush current	< 5.2 A (typically with U_S, Δt = 2 ms)
Filter time	5 ms (in the event of voltage dips at U_s)
Protective circuit	Serial protection against polarity reversal; Suppressor diode

General
Rated control supply current I_S	typ. 70 mA (at U_S)
Digital: Sensor circuit (S10, S12, S22)
Description of the input	safety-related sensor inputs
Number of inputs	3
Input voltage range "0" signal	0 V DC ... 5 V DC (S10, S12)
Input voltage range "1" signal	20.4 V ... 26.4 V
Input current range "0" signal	0 mA ... 2 mA
Inrush current	< 100 mA (typically with U_S at S10/S12)
Inrush current		> -100 mA (typically with U_S at S22)
Filter time	1 ms (Test pulse width of low test pulses)
		1 s (Test pulse rate for low test pulse)
		No brightness test pulses / high test pulses permitted.
Concurrence	∞
Max. permissible overall conductor resistance	50 Ω
Protective circuit	Suppressor diode
Current consumption	38 mA (typically with U_S at S10/S12)
Current consumption		-38 mA (typically with U_S at S22)
Digital: Start circuit (S34, S35)
Description of the input	non-safety-related
Number of inputs	2
Input voltage range "1" signal	20.4 V ... 26.4 V
Inrush current	< 7 mA (Typically with U_S at S34)
Inrush current		< 8 mA (Typically with U_S at S35)
Filter time	No test pulses permitted
Max. permissible overall conductor resistance	50 Ω
Protective circuit	Suppressor diode
Current consumption	2 mA (Typically with U_S at S34)
Current consumption		3 mA (Typically with U_S at S35)

Relay: Enabling current paths (13/14, 23/24, 33/34)
Output description	2 N/O contacts each in series, safety-related, floating
Number of outputs	3
Contact type	3 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 10 V AC/DC
Switching voltage		max. 250 V AC
Switching capacity	min. 100 mW
Inrush current	min. 10 mA
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	5 A (AC15)
Switching capacity in accordance with IEC 60947-5-1		6 A (DC13)
Limiting continuous current	6 A (Observe derating and load limit curve)
Sq. Total current	72 A² (observe derating)
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	10 A gL/gG
Output fuse		4 A gL/gG (for low-demand applications)
Relay: Signaling current path (41/42)
Output description	2 N/C contacts parallel, non-safety-related, floating
Number of outputs	1
Contact type	2 NC parallel
Contact material	AgSnO₂
Switching voltage	min. 10 V AC/DC
Switching voltage		max. 250 V AC
Switching capacity	min. 100 mW
Inrush current	min. 10 mA
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	3 A (AC15)
Switching capacity in accordance with IEC 60947-5-1		2 A (DC13)
Limiting continuous current	6 A
Sq. Total current	36 A²
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	6 A gL/gG

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3
Tightening torque	0.5 Nm ... 0.6 Nm

Status display	2 x green LEDs
Operating voltage display	1 x green LED

Width	22.5 mm
Height	112.2 mm
Depth	114.5 mm

Housing material

PBT

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	3
Performance level (PL)	d
Safety data: IEC 61508 - High demand
Equipment type	Type A
Safety Integrity Level (SIL)	2
Probability of a hazardous failure per hour (PFH_D)	1.00 x 10^-8
Proof test interval	240 Months
Safety data: IEC 61508 - Low demand
Equipment type	Type A
Safety Integrity Level (SIL)	2
Probability of a hazardous failure on demand (PFD_AVG)	1.50 x 10^-3
Proof test interval	36 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, 2g