PSR-MC82-5NO-1NC-1DO-24DC-SP - Extension module Phoenix Contact

Mã sản phẩm: 2702383

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Contact extension up to SIL 3, Cat. 4, PL e in conjunction with suitable evaluation device, 5 enabling current paths, US = 24 V DC, pluggable Push-in terminal block

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety relays
Product family	PSRmini
Application	Extension module
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Times
Typical response time	< 50 ms (Monitored/manual and auto-start)
Typ. starting time with U_s	< 50 ms (when controlled via A1/A2)
Typical release time	< 25 ms (when controlled via A1/A2)
Recovery time	< 100 ms

Maximum power dissipation for nominal condition	15.2 W (at U_S = 30 V, I_L² = 64 A²)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated insulation voltage		250 V AC
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	19.2 V DC ... 30 V DC
Rated control circuit supply voltage U_S	24 V DC -20 % / +25 %
Rated control supply current I_S	typ. 80 mA
Power consumption at U_S	typ. 1.92 W
Inrush current	typ. 125 mA (Δt = 7 ms at U_s)
Filter time	4 ms (at A1 in the event of voltage dips at U_s)
		max. 1 ms (at A1/A2, test pulse width, blanking pulses/dark test)
		5 ms (at A1/A2, test pulse rate, blanking pulses/dark test)
		Where test pulse width < 1 ms: test pulse rate = 5 x test pulse width
		max. 1 ms (at A1/A2, test pulse width, switch-on pulses/light test)
		10 ms (at A1/A2; test pulse rate; switch-on pulses/light test)
		Deactivate the switch-on pulses for safety applications.
Protective circuit	Surge protection; Suppressor diode
Protective circuit		Reverse polarity protection; Universal diode

Relay: Enabling current paths (23/24 ... 63/64)
Output description	safety-related N/O contacts
Number of outputs	5 (undelayed)
Contact type	5 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
		max. 24 V DC (Enabling current path 23/24)
		max. 250 V AC/DC (all other enabling current paths, observe load curve)
Switching capacity	min. 50 mW (5 V / 10 mA)
Inrush current	min. 10 mA
Inrush current		max. 20 A (≤ 100 ms)
Switching capacity in accordance with IEC 60947-5-1	3 A (24 V (DC13))
Switching capacity in accordance with IEC 60947-5-1		3 A (250 V (AC15))
Limiting continuous current	6 A (observe derating)
Sq. Total current	64 A² (observe derating)
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	10 A gL/gG
Output fuse		6 A gL/gG (for low-demand applications)
Relay: Confirmation current path (11/12)
Output description	Safety-related N/C contacts
Number of outputs	1 (undelayed)
Contact type	1 confirmation current path
Contact material	AgSnO
Switching voltage	min. 5 V AC/DC
Switching voltage		max. 24 V DC
Switching capacity	min. 50 mW
Inrush current	min. 10 mA
Inrush current		max. 100 mA
Limiting continuous current	100 mA
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	1 A gL/gG
Signal: M1
Output description	non-safety-related
Number of outputs	1 (digital, PNP)
Voltage	typ. 23 V DC (U_S - 1 V)
Current	max. 100 mA
Maximum inrush current	500 mA (Δt = 1 ms at U_s)
Short-circuit protection	Yes

Connection technology
pluggable	yes
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG	24 ... 16
Stripping length	8 mm

Status display

2 x green LEDs

Width	17.5 mm
Height	116.6 mm
Depth	114.5 mm

Housing material

Polyamide

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4 (In conjunction with suitable evaluating device)
Performance level (PL)	e (In conjunction with suitable evaluating device)
Safety data: IEC 61508 - High demand
Equipment type	Type A
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
SFF_Two-channel	100 %
MTBF	93.52 Years
λ_SU	651.49 FIT
λ_SD	49.29 FIT
λ_DU	0.03 FIT
λ_DD	6.49 FIT
Probability of a hazardous failure per hour (PFH_D)	1.00 x 10^-9
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Equipment type	Type A
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Safe Failure Fraction (SFF)	99.72 %
MTBF	51.3 Years
λ_SU	2005.99 FIT
λ_SD	45.18 FIT
λ_DU	5.76 FIT
λ_DD	0 FIT
Probability of a hazardous failure on demand (PFD_AVG)	1.2 x 10^-4
Probability of a hazardous failure on demand (PFD_AVG)		1.2 x 10^-4
Proof test interval	38 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 60 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Maximum altitude	max. 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g (In the event of stress caused by shock, contact reactions are possible for up to 6 ms.)
Vibration (operation)	10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)