PSR-M-EF5-SDO4-2A-DO8-SC - Extension module Phoenix Contact

Mã sản phẩm: 1104976

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Safe extension module with 4 safe outputs (2 A), 4 reset inputs, 8 signal outputs, TBUS interface, up to SIL 3, Cat. 4/PL e, plug-in screw terminal block, TBUS connector included

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety device
Application	Safe shutdown
Insulation characteristics
Protection class	III
Times
Response time	see user manual
Restart time	min. 5 s (Boot time)
Restart time		max. 10 s (Boot time)

Maximum power dissipation for nominal condition	8.05 W (with max. permissible load)
Nominal operating mode	100% operating factor
Interfaces	DIN rail TBUS for connection to the master module, supplied as standard
Air clearances and creepage distances
Rated insulation voltage	250 V AC
Rated surge voltage/insulation	Basic insulation 4 kV between 24 V power supply and I/Os to the housing
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	19.2 V DC ... 28.8 V DC
Rated control circuit supply voltage U_S	24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Rated control supply current I_S	typ. 25 mA (Outputs inactive)
Rated control supply current I_S		typ. 60 mA (Outputs active, without load)
Power consumption at U_S	typ. 0.6 W (Outputs inactive)
Power consumption at U_S		max. 1.44 W (Outputs active, without load)
Inrush current	2 A (Δt < 1 ms at U_s)
Filter time	typ. 5 ms (in the event of voltage dips at U_s)
Protective circuit	Inverse-parallel protection against polarity reversal
Supply
Designation	24V/A2
Rated control circuit supply voltage U_S	24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Rated control supply current I_S	< 0.5 mA (Outputs inactive)
Rated control supply current I_S		max. 20 mA (Outputs active, without load)
Power consumption at U_S	< 12 mW (Outputs inactive)
Power consumption at U_S		max. 0.48 W (Outputs active, without load)
Inrush current	10 A (Δt = 1 ms at U_s)
Filter time	typ. 1 ms (in the event of voltage dips)

Digital: Reset inputs (FBK1, FBK2, FBK3, FBK4)
Description of the input	IEC 61131-2 type 3
Number of inputs	4
Input voltage range "0" signal	0 V DC ... 5 V DC
Input voltage range "1" signal	11 V DC ... 28.8 V DC
Input current range "0" signal	< 1 mA
Filter time	250 ms ±2 ms (Test pulse rate > 500 ms)
Cable length	max. 100 m (per input)
Max. permissible overall conductor resistance	1.2 kΩ (Input and reset circuit at U_S)
Current consumption	typ. 10 mA (typically with U_S)
Current consumption		max. 13 mA (at a control voltage of 28.8 V DC)

Digital: O1, O2, O3, O4
Output description	Safety-related digital outputs
		PNP, OSSD
		IEC 61131-2 type 2 (observe limiting continuous current)
Number of outputs	4 (can be used as 2 two-channel outputs)
Short-circuit protection	Yes (max. permissible short-circuit current 12 A)
Leakage current	max. 250 µA
Cable length	max. 100 m (per output)
Ohmic load	min. 10 Ω (Observe limiting continuous current)
Max. capacitive load	max. 820 nF
Max. inductive load	max. 2.4 mH
Limiting continuous current	2 A (per channel)
Limiting continuous current		8 A (Total current of all safe digital outputs)
Inrush current	max. 2.5 A (Δt  1 ms)
Nominal output voltage	24 V DC (Supply via A1)
Nominal output voltage range	18.6 V DC ... 28.2 V DC (U_S - 0.6 V)
Switching frequency	max. 1/4 x t_Cycle [Hz]
Output voltage when switched off	< 0.1 V
Test pulses	< 120 µs (Test pulse width of low test pulses)
		≥ 650 ms (Test pulse rate for low test pulse)
		< 150 µs (Test pulse width, high test pulse)
		≥ 1.5 s (Test pulse rate, high test pulse)
Discharging circuit	Yes, internal
Signal: MO1, MO2, MO3, MO4, MO5, MO6, MO7, MO8
Output description	PNP, IEC 61131-2 Typ 0,1
		non-safety-related
		Reference ground A2
Number of outputs	8
Output voltage when switched off	max. 0.1 V
Voltage	24 V DC (via 24 V)
Maximum inrush current	1.1 A (Δt = 3 s at U_s)
Limiting continuous current	100 mA (per channel)
Limiting continuous current		0.8 A (Total current of all digital signal outputs)
Leakage current	max. 100 µA
Switching frequency	max. 1/4 x t_Cycle [Hz]
Short-circuit protection	Yes (self-limitation at 1.1 A)
Cable length	max. 100 m (per output)

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3
Tightening torque	0.5 Nm ... 0.6 Nm

Status display	12 x LED (yellow)
		4 x LED (green, yellow, red)
		1 x LED (green), 2 x LED (orange)
Operating voltage display	1 x green LED
Error indication	2 x LED (red)

Width	22.61 mm
Height	112.58 mm
Depth	113.6 mm

Housing material

Polyamide PA non-reinforced

Safety data
Stop category	0
Safety data: EN ISO 13849
Performance level (PL)	e (2-channel wiring)
Performance level (PL)		d (1-channel wiring)
Safety data: IEC 61508 - High-demand for 2-channel wiring
Equipment type	Type B
Safety Integrity Level (SIL)	3
Probability of a hazardous failure per hour (PFH_D)	8,64 x 10^-9
Proof test interval	240 Months
Duration of use	240 Months
Integrity requirement	IEC 61508 - High-demand for 1-channel wiring
Equipment type	Type B
Safety Integrity Level (SIL)	2
Probability of a hazardous failure per hour (PFH_D)	8,64 x 10^-9
Proof test interval	240 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-10 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-20 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	95 % (non-condensing)
Max. permissible relative humidity (operation)	95 % (non-condensing)
Shock	10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
Vibration (operation)	10 Hz ... 150 Hz, 2g