PSR-CT-C-SEN-1-8 - Safety switch sensor Phoenix Contact

Mã sản phẩm: 2702972

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Proximity safety circuit up to Cat. 4, PL e (EN ISO 13849), SIL 3 (IEC 61508), unicode sensor with RFID coding, model 4 (EN ISO 14119), automatic or manual start, integrated diagnostics, 24 V DC supply, IP69K, M12 connector

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety switches
Application	Safety door monitoring
Application		Position monitoring
Technology	Transponder
Insulation characteristics
Protection class	III
Times
Discrepancy time	max. 10 ms (between the safety outputs)
Switch-on delay	typ. 5 s (after switching U_B on)
Switch-on time	max. 400 ms (for the safety outputs)
Risk time	max. 125 ms (Stand-alone device)
Test pulses	typ. 300 µs (Test pulse duration)
Test pulses		approx. 100 ms (Test pulse interval)
Delay time	typ. 10 ms (Risk time delay per device)

Short-circuit current	typ. 100 A (conditional short-circuit current)
Switching frequency	max. 1 Hz
Rated insulation voltage	max. 300 V
Rated surge voltage	max. 1.5 kV
Supply
Supply voltage	24 V DC ±15 % (PELV, controlled, residual ripple < 5% )
Current consumption	max. 40 mA
Protection	min. 0.25 A (to be performed externally)
Protection		max. 8 A (to be performed externally)

Signal
Designation	DGN
Output description	p-wired
Number of outputs	1
Output voltage	min. (U_B - 1.5 V (HIGH))
		max. (U_B (HIGH))
		min. 0 V DC (LOW)
		max. 1 V DC (LOW)
Current	min. 1 mA
Current		max. 50 mA
Short-circuit-proof	yes
Safety output
Designation	FO1A, FO1B
Output description	Semiconductor outputs, p-wired
Number of outputs	2
Output voltage	min. (U_B - 1.5 V (HIGH FO1A, FO1B))
		max. (U_B(HIGH FO1A, FO1B))
		min. 0 V DC (LOW FO1A/FO1B)
		max. 1 V DC (LOW FO1A/FO1B)
Switching current	min. 1 mA (per safety output)
Switching current		max. 150 mA (per safety output)
Residual current	≤ 0.25 mA
Utilization category in accordance with IEC 60947-5-2	150 mA (24 V (DC13))
Short-circuit-proof	yes
Note on protection circuit	NOTE: Protect the outputs under inductive loads with a freewheeling diode.

Connection technology
Connection technology	M12 connector
pluggable	no
Number of positions	8
Conductor connection
Connection method	Connector

Status display

2 LEDs

Dimensional drawing
Width	26.5 mm
Height	40 mm
Depth	18 mm
Minimum distance	140 mm (between two safety circuits)
Minimum distance		7 mm (between sensor and actuator when traveling in the Y-direction)

Housing material

PBT

Safety data: EN ISO 13849
Category	4
Performance level (PL)	e
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)	3
Probability of a hazardous failure per hour (PFH_D)	6 x 10^-10

Ambient conditions
Degree of protection	IP65/IP67/IP69/IP69K
Degree of protection		IP67 (with SAC cabling)
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Vibration (operation)	in accordance with EN 60947-5-2

Conformity/Approvals
EMC conformance	EN 60947-5-3

Mounting type	not flush
Assembly instructions	Note EN ISO 14119
Assembly instructions		Maximum tightening torque to secure: 0.8 Nm
Mounting position	any
Connection method	Connector