PLC-V8C/PT-24DC/EM - Extension module Phoenix Contact

Mã sản phẩm: 2905137

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

PLC logic extension module with 16 I/Os, for plug-in connection to eight PLC-INTERFACE terminal blocks for extending the basic module (a maximum of two extension modules can be connected to a basic module), Push-in connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	For proper use, the specifications of the installation directive (see Downloads) must be observed.
Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Extension module
Product family	PLC logic
Operating mode	100% operating factor
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Air clearances and creepage distances between the power circuits
Rated insulation voltage	50 V
Rated surge voltage	0.8 kV
Supply
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 26.4 V DC
Maximum input current at U_N	65 mA
Protective circuit	Reverse polarity protection
Protective circuit		Surge protection

Digital inputs
Number of inputs	8 (2 configurable as analog)
Description of the input	EN 61131-2, type 3
Input voltage	24 V DC
Signal level "0" signal	< 5 V
Signal level "1" signal	> 11 V
Input current "0" signal	< 1 mA
Input current "1" signal	typ. 2.5 mA
Status display	Yellow LED
Analog inputs
Number of inputs	2 (IN6 and IN7 are configurable as analog)
Input voltage range	0 V ... 10 V
Input resistance	> 3.5 kΩ
Contact to PLC-INTERFACE
Number of inputs	≤ 8
Description of the input	technical data depends on the PLC-INTERFACE terminal block used
Input voltage	19 V DC
Typical current consumption	4 mA
Input resistance	< 100 mΩ

Number of outputs	≤ 8
Nominal output voltage	24 V DC
Nominal current	9 mA

COMBICON connection
Connection method	Push-in connection
Stripping length	9 mm
Number of connections	1
Number of positions	10
Note	Device supply and 8 x inputs
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
		0.25 mm² ... 0.5 mm² (Ferrule with plastic sleeve)
		0.25 mm² ... 1.5 mm² (Ferrules without plastic sleeve)
Conductor cross section AWG	26 ... 16
PLC logic - bus
Connection method	Insulation displacement connection
Number of connections	1
Number of positions	4

Status display

Green LED

Dimensional drawing
Width	50 mm
Height	48.5 mm
Height		111 mm (with relay)
Depth	82.5 mm
Depth		87 mm (with relay)

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 45 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Max. permissible relative humidity (operation)	95 %

CE
Certificate	CE-compliant
UL, USA/Canada
Identification	Class I, Div. 2, Groups A, B, C, D T4
UL, Canada
Identification	Class I, Zone 2, Ex nA IIC Gc T4 X
UL, USA
Identification	Class I, Zone 2, AEx nA IIC T4