PLC-RSC- 24UC/2X21/FG - Relay Module Phoenix Contact

Mã sản phẩm: 2910536

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Screw connection, 2 changeover contacts, forcibly actuated, Bridge rectifier, Input voltage: 24 V AC/DC

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Relay Module
Product family	PLC-INTERFACE
Application	Forcibly guided contacts
Operating mode	100% operating factor
Mechanical service life	approx. 10⁷ cycles
B_10d	600000 Cycles (AC1; 250 V / 6 A; 1 NO)
		900000 Cycles (AC1; 250 V / 3 A; 1 NO)
		1800000 Cycles (AC1; 250 V / 1,5 A; 1 NO)
		180000 Cycles (AC15; 250 V / 3 A; 1 NO)
		560000 Cycles (AC15; 250 V / 2 A; 1 NO)
		4600000 Cycles (AC15; 250 V / 0,75 A; 1 NO)
		360000 Cycles (DC13; 24 V / 3 A; 1 NO)
		740000 Cycles (DC13; 24 V / 1,5 A; 1 NO)
		4200000 Cycles (DC13; 24 V / 0,75 A; 1 NO)
Insulation characteristics
Insulation	Safe isolation, reinforced insulation
Insulation characteristics: Standards/regulations
Insulation	Safe isolation, reinforced insulation
Overvoltage category	III
Pollution degree	2

Maximum power dissipation for nominal condition	0.72 W
Test voltage (Winding/contact)	4 kV_rms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)	2.5 kV_rms (50 Hz, 1 min., changeover contact/changeover contact)
Standards/regulations
Rated insulation voltage	250 V AC
Rated surge voltage	6 kV

Coil side
Nominal input voltage U_N	24 V AC/DC
Input voltage range	20.9 V AC/DC ... 32.4 V AC/DC (20 °C)
Input voltage range in reference to U_N	see diagram
Typical input current at U_N	30 mA
Typical response time	3 ms ... 15 ms
Typical release time range	3 ms ... 15 ms
Coil voltage	24 V DC
Protective circuit	Bridge rectifier
Operating voltage display	Yellow LED

Switching
Contact type	2 changeover contacts, forcibly actuated
Type of switch contact	Single contact
Drive and function	monostable
Drive (polarity)	polarized
Contact material	AgNi
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	5 V (10 mA)
Limiting continuous current	6 A
Maximum inrush current	6 A
Min. switching current	10 mA (5 V)
Interrupting rating (ohmic load) max.	144 W (24 V DC)
		288 W (48 V DC)
		88 W (110 V DC)
		110 W (220 V DC)
		1500 VA (250 V AC)
Switching capacity min.	150 mW
Switching capacity	3 A (24 V, DC13)
Switching capacity		3 A (230 V, AC15)
Force-guided contacts in accordance with EN 61810-3	Type B

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
		0.2 mm² ... 2.5 mm² (Single ferrule)
		2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG	26 ... 14
Tightening torque	0.6 Nm ... 0.8 Nm

Width	14 mm
Height	80 mm
Depth	104 mm

Ambient conditions
Degree of protection (Relay)	RT II (Relay)
Degree of protection (Relay base)	IP20 (Relay base)
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 60 °C
Ambient temperature (storage/transport)	-20 °C ... 85 °C
Altitude	≤ 2000 m

UL, USA
Identification	UL 508
		UL 508 Recognized
UL, USA/Canada
Identification	UL 508
		UL 508 Recognized
Corrosive gas test
Identification	ISA-S71.04. G3 Harsh Group
		EN 60068-2-60