PLC-ASC-PT100-IN - Extension module Phoenix Contact

Mã sản phẩm: 2906918

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Pt 100/Pt 1000 temperature transducer for PLC logic logic modules (Generation 2 only), single-channel, signal type (Pt 100, Pt 1000) configurable via DIP switch, screw connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

For proper use, the specifications of the installation directive (see Downloads) must be observed.

Product type	Extension module
Product family	PLC logic
Operating mode	100% operating factor
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics: Air clearances and creepage distances
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Air clearances and creepage distances
Rated insulation voltage	50 V
Rated surge voltage	0.5 kV
Supply
Rated control circuit supply voltage U_S	24 V DC
Rated control supply voltage range with reference to U_S	0.8 ... 1.1
Rated control supply current I_S	14 mA
Protective circuit	Reverse polarity protection
Protective circuit		Surge protection

Analog input resistance
Sensor types (RTD) that can be used	Pt 100 (IEC 60751, α = 0,00385)
Number of inputs	1
Connection technology	2-conductor
Sensor input current	900 µA
Temperature measuring range	-50 °C ... 200 °C
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	1 %
Surge voltage protection	> 33 V
Resolution	10 bit (scaled to 0 to 1000)
Analog input resistance
Sensor types (RTD) that can be used	Pt 1000 (IEC 60751, α = 0.00385)
Number of inputs	1
Connection technology	2-conductor
Sensor input current	900 µA
Temperature measuring range	-50 °C ... 200 °C
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	1 %
Surge voltage protection	> 33 V
Resolution	10 bit (scaled to 0 to 1000)

Digital
Output name	Digital output
Switching voltage range	5 V DC ... 30 V DC
Switching current	≤ 3 mA

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
		0.2 mm² ... 2.5 mm² (Single ferrule)
		2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG	26 ... 14
Tightening torque	0.6 Nm ... 0.8 Nm