PLC-APT-UI-OUT - Extension module Phoenix Contact

Mã sản phẩm: 2906921

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Analog output module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4 mA ... 20 mA, 0 mA ... 20 mA, 0 V ... 10 V, 2 V ... 10 V) can be configured via DIP switch, Push-in connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

For proper use, the specifications of the installation directive (see Downloads) must be observed.

Product type	Extension module
Product family	PLC logic
Operating mode	100% operating factor
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics: Air clearances and creepage distances
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Air clearances and creepage distances
Rated insulation voltage	50 V
Rated surge voltage	0.5 kV
Supply
Rated control circuit supply voltage U_S	24 V DC
Rated control supply voltage range with reference to U_S	0.8 ... 1.1
Rated control supply current I_S	≤ 28 mA
Protective circuit	Reverse polarity protection
Protective circuit		Surge protection

Digital input
Rated actuating voltage U_C	24 V DC
Rated actuating current I_C	≤ 1 mA

Analog
Output name	Analog voltage output
Number of outputs	1
Voltage output signal	0 V ... 10 V
Voltage output signal		2 V ... 10 V
Maximum output voltage	12.3 V
Ripple	< 20 mV_PP
Load/output load voltage output	10 kΩ
Surge voltage protection	> 33 V
Maximum transmission error	1 %
Resolution	10 bit (scaled to 0 to 1000)
Protective circuit	Surge protection
Analog
Output name	Analog output for current
Number of outputs	1
Current output signal	0 mA ... 20 mA
Current output signal		4 mA ... 20 mA
Maximum output current	24.6 mA
Load/output load current output	500 Ω (20 mA)
Surge voltage protection	> 33 V
Maximum transmission error	1 %
Resolution	10 bit
Protective circuit	Surge protection

Connection method	Push-in connection
Stripping length	10 mm
Number of connections	4
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	26 ... 14