MINI MCR-SL-UI-I-LP-NC - Signal conditioner Phoenix Contact

Mã sản phẩm: 2902829

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

2-way loop-powered isolating amplifier (supplied on the output side), can be configured via DIP switches, with screw connection technology and standard configuration.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Signal conditioner
Product family	MINI Analog
No. of channels	1
Configuration	DIP switches
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Alignment span	± 2 %
Alignment zero	± 2 %
No. of channels	1
Electrical isolation	2-way isolation
Electrical isolation between input and output	yes
Limit frequency (3 dB)	approx. 30 Hz
Maximum power dissipation for nominal condition	19 mW
Step response (10-90%)	approx. 16 ms
Maximum temperature coefficient	0.01 %/K
Temperature coefficient, typical	0.005 %/K
Maximum transmission error	< 0.1 % (of final value)
Maximum transmission error		< 0.2 % (Without adjustment)
Electrical isolation Input/output
Rated insulation voltage	50 V AC/DC
Test voltage	1.5 kV AC (50 Hz, 60 s)
Insulation	Basic insulation in accordance with IEC/EN 61010
Supply
Supply voltage range	loop-powered, no external supply necessary
Power consumption	28 mW (without signal)

Signal: Voltage/current
Number of inputs	1
Voltage input signal	0 mV ... 1000 mV
		0 mV ... 750 mV
		0 mV ... 500 mV
		0 mV ... 300 mV
		0 mV ... 250 mV
		0 mV ... 200 mV
		0 mV ... 150 mV
		0 mV ... 125 mV
		0 mV ... 120 mV
		0 mV ... 100 mV
		0 mV ... 75 mV
		0 mV ... 60 mV
		0 mV ... 50 mV
		0 V ... 10 V
		0 V ... 7.5 V
		0 V ... 5 V
		0 V ... 3 V
		0 V ... 2.5 V
		0 V ... 2 V
		0 V ... 1.5 V
		0 V ... 1.25 V
		0 V ... 1.2 V
		0 V ... 30 V
		0 V ... 25 V
		0 V ... 20 V
		0 V ... 12.5 V
		0 V ... 12 V
		0 V ... 15 V
		-1000 mV ... 1000 mV
		-750 mV ... 750 mV
		-500 mV ... 500 mV
		-300 mV ... 300 mV
		-250 mV ... 250 mV
		-200 mV ... 200 mV
		-125 mV ... 125 mV
		-120 mV ... 120 mV
		-150 mV ... 150 mV
		-100 mV ... 100 mV
		-75 mV ... 75 mV
		-60 mV ... 60 mV
		-50 mV ... 50 mV
		-10 V ... 10 V
		-7.5 V ... 7.5 V
		-5 V ... 5 V
		-3 V ... 3 V
		-2.5 V ... 2.5 V
		-2 V ... 2 V
		-1.25 V ... 1.25 V
		-1.2 V ... 1.2 V
		-1.5 V ... 1.5 V
		-30 V ... 30 V
		-25 V ... 25 V
		-20 V ... 20 V
		-12.5 V ... 12.5 V
		-12 V ... 12 V
		-15 V ... 15 V
		200 mV ... 1000 mV
		150 mV ... 750 mV
		100 mV ... 500 mV
		60 mV ... 300 mV
		50 mV ... 250 mV
		40 mV ... 200 mV
		25 mV ... 125 mV
		24 mV ... 120 mV
	30 mV ... 150 mV
	20 mV ... 100 mV
	15 mV ... 75 mV
	12 mV ... 60 mV
	10 mV ... 50 mV
	2 V ... 10 V (additional areas can be configured, see table)
	1.5 V ... 7.5 V
	1 V ... 5 V
	0.6 V ... 3 V
	0.5 V ... 2.5 V
	0.4 V ... 2 V
	0.25 V ... 1.25 V
	0.24 V ... 1.2 V
	0.3 V ... 1.5 V
	6 V ... 30 V
	5 V ... 25 V
	4 V ... 20 V
	2.5 V ... 12.5 V
	2.4 V ... 12 V
	3 V ... 15 V
Max. voltage input signal	< 40 V
Current input signal	0 mA ... 40 mA
		0 mA ... 30 mA
		0 mA ... 20 mA
		0 mA ... 12 mA
		0 mA ... 10 mA
		0 mA ... 8 mA
		0 mA ... 7.5 mA
		0 mA ... 5 mA
		0 mA ... 6 mA
		0 mA ... 4 mA
		0 mA ... 3 mA
		0 mA ... 2.5 mA
		0 mA ... 2 mA
		-40 mA ... 40 mA
		-30 mA ... 30 mA
		-20 mA ... 20 mA
		-12 mA ... 12 mA
		-10 mA ... 10 mA
		-8 mA ... 8 mA
		-7.5 mA ... 7.5 mA
		-5 mA ... 5 mA
		-6 mA ... 6 mA
		-4 mA ... 4 mA
		-3 mA ... 3 mA
		-2.5 mA ... 2.5 mA
		-2 mA ... 2 mA
		8 mA ... 40 mA
		6 mA ... 30 mA
		4 mA ... 20 mA
		2.4 mA ... 12 mA
		2 mA ... 10 mA
		1.6 mA ... 8 mA
		1.5 mA ... 7.5 mA
		1 mA ... 5 mA
		1.2 mA ... 6 mA
		0.8 mA ... 4 mA
		0.6 mA ... 3 mA
		0.5 mA ... 2.5 mA
		0.4 mA ... 2 mA
Max. current input signal	< 50 mA (Dielectric strength up to 30 V)
Input resistance of voltage input	100 kΩ (≤ 1 V)
Input resistance of voltage input		1 MΩ (≥ 1 V)
Input resistance current input	≤ 50 Ω

Signal
Number of outputs	1
Configurable/programmable	Yes, preconfigured
Current output signal	4 mA ... 20 mA
Max. current output signal	35 mA (output limit)
Load/output load current output	< 1000 Ω ((U_B- 8 V) / 22 mA)
Ripple	< 20 mV_PP (at 500 Ω)

Connection method	Screw connection
Stripping length	12 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	26 ... 12

Width	6.2 mm
Height	93.1 mm
Depth	101.2 mm

Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 2
Housing material	PBT

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
UL, USA/Canada
Identification	UL 508 Listed
		Class I, Div. 2, Groups A, B, C, D T5
		Class I, Zone 2, Group IIC
Shipbuilding approval
Certificate	DNV GL TAA00002R0
DNV GL data
Temperature	B
Humidity	B
Vibration	B
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Comments	Safety measures must be taken to prevent electrostatic discharge.
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	0.5 %
Electromagnetic HF field
Comments	Criterion A
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	2 %
Fast transients (burst)
Comments	Criterion B
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Comments	Criterion B
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	0.5 %
Conducted interference
Comments	Criterion A