MINI MCR-SL-R-UI - Resistance/potiposition transducer Phoenix Contact

Mã sản phẩm: 2864095

MCR potiposition transducer for conversion of potentiometer positions into a standard analog signal, 0 Ω input... 100 Ω to 0 kΩ ... 100 kΩ

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Potiposition transducer
Product family	MINI Analog
No. of channels	1
Configuration	DIP switches
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Functionality
Configuration	DIP switches

No. of channels	1
Maximum power dissipation for nominal condition	235.5 mW
Step response (0–99%)	< 30 ms
Maximum temperature coefficient	< 0.02 %/K
Temperature coefficient, typical	< 0.02 %/K
Maximum transmission error	< 0.2 %
Electrical isolation Input/output/power supply
Rated insulation voltage	30 V AC
Rated insulation voltage		50 V DC
Test voltage	1.5 kV AC (50 Hz, 60 s)
Insulation	Basic insulation in accordance with IEC/EN 61010
Supply
Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption	< 25 mA (at 24 V DC)
Power consumption	< 500 mW

Signal: Voltage/current
Number of outputs	1
Voltage output signal	0 V ... 5 V
		1 V ... 5 V
		0 V ... 10 V
		10 V ... 0 V
Max. voltage output signal	12.5 V
Non-load voltage	 12.5 V
Current output signal	0 mA ... 20 mA
		4 mA ... 20 mA
		20 mA ... 0 mA
		20 mA ... 4 mA
Max. current output signal	23 mA
Short-circuit current	 10 mA
Load/output load voltage output	> 10 kΩ
Load/output load current output	< 500 Ω (20 mA)
Ripple	< 20 mV_PP (500 Ω)
Ripple		< 20 mV_PP (10 kΩ)
Behavior in the event of a sensor error	0 % ... 105 % (configurable)

Connection method	Screw connection
Stripping length	12 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	26 ... 12

Error indication

Red LED

Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 2
Housing material	PBT

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 65 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
UL, USA/Canada
Identification	UL 508 Recognized
Identification		Class I, Div. 2, Groups A, B, C, D T4
Shipbuilding approval
Certificate	DNV GL TAA000020N
DNV GL data
Temperature	B
Humidity	B
Vibration	B
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	5 %
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	5 %
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	5 %