MINI MCR-2-UI-FRO-PT - Frequency transducer Phoenix Contact

Mã sản phẩm: 2902032

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Frequency value transformer
Product family	MINI Analog Pro
No. of channels	1
Type	Signal conditioner
Configuration	DIP switches
		Software
		App
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Functionality
Configuration	DIP switches
		Software
		App

No. of channels	1
Electrical isolation between input and output	yes
Step response (0–99%)	120 ms (15 Hz sample rate)
		35 ms (60 Hz sample rate)
		15 ms (240 Hz sample rate, can only be set via software)
		130 ms (15 Hz sample rate)
		40 ms (60 Hz sample rate)
		20 ms (240 Hz sample rate, can only be set via software)
Maximum temperature coefficient	< 0.01 %/K
Temperature coefficient, typical	0.01 %/K
Electrical isolation Input/output/power supply
Rated insulation voltage	300 V_rms
Test voltage	3 kV AC (50 Hz, 60 s)
Insulation	Reinforced insulation according to IEC/EN 61010-1
Supply
Nominal supply voltage	24 V DC
Supply voltage range	9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption	27 mA (12 V DC)
Typical current consumption		13.5 mA (24 V DC)
Power consumption	≤ 350 mW (9.6 V DC)

Signal: Voltage/current
Number of inputs	1
Configurable/programmable	Yes
Voltage input signal	0 V ... 10 V (via DIP switch)
		2 V ... 10 V (via DIP switch)
		0 V ... 5 V (via DIP switch)
		1 V ... 5 V (via DIP switch)
		10 V ... 0 V (via DIP switch)
		10 V ... 2 V (via DIP switch)
		5 V ... 0 V (via DIP switch)
		5 V ... 1 V (via DIP switch)
		0 V ... 12 V (can be set via software)
Max. voltage input signal	12 V
Current input signal	0 mA ... 20 mA (via DIP switch)
		4 mA ... 20 mA (via DIP switch)
		0 mA ... 10 mA (via DIP switch)
		2 mA ... 10 mA (via DIP switch)
		20 mA ... 0 mA (via DIP switch)
		20 mA ... 4 mA (via DIP switch)
		10 mA ... 0 mA (via DIP switch)
		10 mA ... 2 mA (via DIP switch)
		0 mA ... 24 mA (can be set via software)
Max. current input signal	24 mA
Input resistance of voltage input	> 120 kΩ
Input resistance current input	approx. 50 Ω (+0.7 V for test diode)

Frequency: Frequency/transistor
Frequency output	0 Hz ... 10 kHz (via DIP switch)
		0 Hz ... 5 kHz (via DIP switch)
		0 Hz ... 2.5 kHz (via DIP switch)
		0 Hz ... 1 kHz (via DIP switch)
		0 Hz ... 500 Hz (via DIP switch)
		0 Hz ... 250 Hz (via DIP switch)
		0 Hz ... 100 Hz (via DIP switch)
		0 Hz ... 50 Hz (via DIP switch)
		0 Hz ... 10.5 kHz (can be set via software)
Load min.	4 mA ≤ (U_L / R_L) ≤ 100 mA
Maximum transmission error	≤ 0.1 % (> 7 kHz ≤ 0.2 %)
Output signal PWM	15.6 kHz (10 bits, via DIP switch)
		1.9 kHz (10 bits, via DIP switch)
		3.9 kHz (12 bits, via DIP switch)
		488 Hz (12 bits, via DIP switch)
		977 Hz (14 bits, via DIP switch)
		122 Hz (14 bits, via DIP switch)
		244 Hz (16 bits, via DIP switch)
		31 Hz (16 bits, via DIP switch)
		31 Hz ... 15.6 kHz (can be set via software)
Load min.	12 mA ≤ (U_L / R_L) ≤ 100 mA
Maximum transmission error	< 0.2 % (PWM frequency  500 Hz)
		< 0.5 % (500 Hz < PWM frequency  2000 Hz)
		< 1 % (2000 Hz < PWM frequency  4000 Hz)
		< 2 % (4000 Hz < PWM frequency  8000 Hz)
		< 3 % (8000 Hz < PWM frequency  16000 Hz)
Load current maximum	100 mA
Maximum switching voltage	30 V DC
Overrange/underrange	Can be set (via software)
Switching: Transistor
Number of outputs	1
Contact type	1 N/O contact
Minimum switching voltage	1 V DC
Maximum switching voltage	30 V DC
Min. switching current	100 µA
Max. switching current	100 mA (30 V DC)
Signal
Number of outputs	1

Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section rigid	0.2 mm² ... 2.5 mm² (with ferrule)
Conductor cross section rigid		0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12 (flexible)

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Data: IFS interface
Connection method	Micro USB type B

Error indication

Red LED

Width	6.2 mm
Height	109.81 mm
Depth	119.2 mm

Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 2
Housing material	PBT

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
ATEX
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	BVS 19 ATEX E 083 X
UKCA Ex (UKEX)
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	PxCIF21UKEX2905026X
IECEx
Identification	Ex ec IIC T4 Gc
Certificate	IECEx BVS 19.0072X
CCC / China-Ex
Identification	Ex nA IIC T4 Gc
Certificate	NEPSI GYJ20.1318X
UL, USA/Canada
Identification	UL 508 Listed
		Class I, Div. 2, Groups A, B, C, D T6
		Class I, Zone 2, Group IIC T6
Shipbuilding approval
Certificate	DNV GL TAA000021E Rev. 1
EAC Ex
Identification	 2Ex ec IIC T4 Gc
Certificate	BY/112 02.01 TP012 103.01 00081
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4

Mounting type	DIN rail mounting
Assembly instructions	The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail.
Mounting position	any