MINI MCR-2-U-UI-C - Signal conditioner Phoenix Contact

Mã sản phẩm: 2902018

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals in the mV and V range, unipolar as well as bipolar. Screw connection technology, order configuration.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Signal conditioner
Product family	MINI Analog Pro
No. of channels	1
Type	Signal conditioner
Configuration	DIP switches
Insulation characteristics: GB Standard
Overvoltage category	II
Pollution degree	2

No. of channels	1
Electrical isolation	3-way isolation
Electrical isolation between input and output	yes
Limit frequency (3 dB)	30 Hz (via DIP switch)
Limit frequency (3 dB)		5 kHz (via DIP switch)
Protective circuit	Transient protection
Step response (10-90%)	< 8.5 ms (with 30 Hz filter)
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	≤ 0.1 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage	300 V_rms
Test voltage	3 kV AC (50 Hz, 60 s)
Insulation	Reinforced insulation according to IEC/EN 61010-1
Supply
Nominal supply voltage	24 V DC
Supply voltage range	9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption	25 mA (Current output, at 24 V DC incl. load)
Typical current consumption		54 mA (Current output, at 12 V DC incl. load)
Power consumption	≤ 800 mW (at I_OUT = 20 mA, 9.6 V DC, 600 Ω load)

Signal: Voltage
Number of inputs	1
Configurable/programmable	Yes
Input signal	Voltage
Voltage input signal	-50 mV ... 50 mV (via DIP switch)
		0 mV ... 50 mV (via DIP switch)
		-60 mV ... 60 mV (via DIP switch)
		0 mV ... 60 mV (via DIP switch)
		-75 mV ... 75 mV (via DIP switch)
		0 mV ... 75 mV (via DIP switch)
		-80 mV ... 80 mV (via DIP switch)
		0 mV ... 80 mV (via DIP switch)
		-100 mV ... 100 mV (via DIP switch)
		0 mV ... 100 mV (via DIP switch)
		-120 mV ... 120 mV (via DIP switch)
		0 mV ... 120 mV (via DIP switch)
		-150 mV ... 150 mV (via DIP switch)
		0 mV ... 150 mV (via DIP switch)
		-200 mV ... 200 mV (via DIP switch)
		0 mV ... 200 mV (via DIP switch)
		-240 mV ... 240 mV (via DIP switch)
		0 mV ... 240 mV (via DIP switch)
		-300 mV ... 300 mV (via DIP switch)
		0 mV ... 300 mV (via DIP switch)
		-500 mV ... 500 mV (via DIP switch)
		0 mV ... 500 mV (via DIP switch)
		-600 mV ... 600 mV (via DIP switch)
		0 mV ... 600 mV (via DIP switch)
		-750 mV ... 750 mV (via DIP switch)
		0 mV ... 750 mV (via DIP switch)
		-800 mV ... 800 mV (via DIP switch)
		0 mV ... 800 mV (via DIP switch)
		-1 V ... 1 V (via DIP switch)
		0 V ... 1 V (via DIP switch)
		-1.2 V ... 1.2 V (via DIP switch)
		0 V ... 1.2 V (via DIP switch)
		-1.5 V ... 1.5 V (via DIP switch)
		0 V ... 1.5 V (via DIP switch)
		-2 V ... 2 V (via DIP switch)
		0 V ... 2 V (via DIP switch)
		-2.4 V ... 2.4 V (via DIP switch)
		0 V ... 2.4 V (via DIP switch)
		-3 V ... 3 V (via DIP switch)
		0 V ... 3 V (via DIP switch)
		-5 V ... 5 V (via DIP switch)
		0 V ... 5 V (via DIP switch)
		-6 V ... 6 V (via DIP switch)
		0 V ... 6 V (via DIP switch)
		-7.5 V ... 7.5 V (via DIP switch)
		0 V ... 7.5 V (via DIP switch)
		-8 V ... 8 V (via DIP switch)
		0 V ... 8 V (via DIP switch)
		-10 V ... 10 V (via DIP switch)
		0 V ... 10 V (via DIP switch)
		-12 V ... 12 V (via DIP switch)
		0 V ... 12 V (via DIP switch)
		-15 V ... 15 V (via DIP switch)
		0 V ... 15 V (via DIP switch)
		-20 V ... 20 V (via DIP switch)
		0 V ... 20 V (via DIP switch)
		-24 V ... 24 V (via DIP switch)
		0 V ... 24 V (via DIP switch)
		-30 V ... 30 V (via DIP switch)
		0 V ... 30 V (via DIP switch)
Max. voltage input signal	33 V
Input resistance of voltage input	> 10 kΩ

Signal: Voltage/current
Number of outputs	1
Configurable/programmable	Yes
Voltage output signal	0 V ... 5 V (via DIP switch)
		1 V ... 5 V (via DIP switch)
		-5 V ... 5 V (via DIP switch)
		0 V ... 10 V (via DIP switch)
		2 V ... 10 V (via DIP switch)
		-10 V ... 10 V (via DIP switch)
Non-load voltage	< 17 V
Current output signal	0 mA ... 20 mA (via DIP switch)
Current output signal		4 mA ... 20 mA (via DIP switch)
Max. current output signal	22 mA
Short-circuit current	< 32 mA
Load/output load voltage output	≥ 10 kΩ
Load/output load current output	≤ 600 Ω (at 20 mA)
Ripple	< 20 mV_PP (at 600 Ω)
Ripple		< 20 mV_PP (at 600 Ω)

Connection method	Screw connection
Stripping length	10 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section rigid		0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12 (flexible)
Tightening torque	0.5 Nm ... 0.6 Nm

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Status display

Green LED (supply voltage)

Width	6.2 mm
Height	109.81 mm
Depth	119.2 mm

Housing material

PBT

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
ATEX
Identification	 II 3 G Ex ec ic IIC T4 Gc
Certificate	BVS 19 ATEX E 047 X
UKCA Ex (UKEX)
Identification	 II 3 G Ex ec ic IIC T4 Gc
Certificate	PxCIF21UKEX2902000X
IECEx
Identification	Ex ec ic IIC T4 Gc
Certificate	IECEx BVS 19.0041X
CCC / China-Ex
Identification	Ex nA ic IIC T4 Gc
UL, USA/Canada
Identification	UL 508 Listed
		Class I, Div. 2, Groups A, B, C, D T6
		Class I, Zone 2, Group IIC T6
Shipbuilding approval
Certificate	DNV GL TAA00002UA
EAC Ex
Identification	 2Ex ec ic IIC T4 Gc
Certificate	BY/112 02.01 TP012 103.01 00079
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Comments	Safety measures must be taken to prevent electrostatic discharge.
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6

Electrical isolation	3-way isolation
GB Standard
Standards/regulations	GB 3836.1
		GB 3836.4
		GB 3836.8

Mounting type	DIN rail mounting
Assembly instructions	The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail.
Mounting position	any