MCR-SLP-1-5-UI-0 - Current transducers Phoenix Contact

Mã sản phẩm: 2814359

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

MCR passive current measuring transducer, for sinusoidal alternating currents 0..1 A AC/0..5 A AC, without switching output, output signal 0..10 V/0..20 mA

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Current transducer
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Total error	≤ 1.175 % (Temperature range)
Test voltage	3.5 kV
Measuring category	III
Step response (10-90%)	< 200 ms
Maximum temperature coefficient	< 0.015 %/K
Maximum transmission error	< 0.5 % (of final value)
Rated insulation voltage	300 V AC (to earth)

Signal
Configurable/programmable	no
Measurement
Input current range	0 A AC ... 1 A AC (Permitted continuous overload: 120%)
Overload capacity	2 x I_N (5 min. at 60°C ambient temperature)
Surge strength	50 A (1 s)
Permissible output range	1.2 x I_N
Nominal frequency f_N	50 Hz
Frequency measuring range	45 Hz ... 60 Hz
Power dissipation	1.6 VA (at I_A = 20 mA)
Curve type	Sine
Measurement
Input current range	0 A AC ... 5 A AC (Permitted continuous overload: 120%)
Impulse form	Sine
Overload capacity	2 x I_N (5 min. at 60°C ambient temperature)
Surge strength	100 A (1 s)
Permissible output range	1.2 x I_N
Nominal frequency f_N	50 Hz
Frequency measuring range	45 Hz ... 60 Hz
Power dissipation	2.2 VA (I = 20 mA)

Signal: Voltage
Voltage output signal	0 V ... 10 V
Max. voltage output signal	20 V
Load/output load voltage output	> 100 kΩ
Ripple	< 50 mV_PP
Signal: Current
Current output signal	0 mA ... 20 mA
Max. current output signal	30 mA
Load/output load current output	< 750 Ω
Load/output load current output		< 250 Ω (when current and voltage outputs are used simultaneously)
Ripple	< 50 mV_PP
Residual ripple, in reference to the measured value	0.5 % (pp of measured value)

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14

Item dimensions
Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Housing material

Polyamide PA non-reinforced

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-25 °C ... 80 °C (non-condensing)
Altitude	< 2000 m
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4