MACX MCR-UI-UI-SP-NC - Signal conditioner Phoenix Contact

Mã sản phẩm: 2811556

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Configurable 3-way isolating amplifier with safe electrical isolation, 24 V, power bridging. DIP switches on the front, over 1600 signal conversions can be set. Standard configuration (IN 0 ... 10 V/OUT 0 ... 20 mA), spring-cage connection, SIL.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Signal conditioner
Product family	MACX Analog
No. of channels	1
Type	Signal conditioners with SIL functional safety
Configuration	DIP switches
Insulation characteristics: GB Standard
Overvoltage category	II
Pollution degree	2

Alignment span	± 4 %
Alignment zero	± 4 %
No. of channels	1
Rated insulation voltage	300 V AC
Electrical isolation between input and output	yes
Limit frequency (3 dB)	10 kHz (Can be switched to 30 Hz)
Protective circuit	Transient protection
Step response (10-90%)	35 µs (10 kHz)
Step response (10-90%)		11 ms (30 Hz)
Maximum temperature coefficient	0.0075 %/K
Maximum transmission error	≤ 0.1 % (Compared to the final value)
Electrical isolation Input/output/power supply
Rated insulation voltage	300 V_rms
Test voltage	2.5 kV AC (50 Hz, 60 s)
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Supply
Supply voltage range	9.6 V DC ... 30 V DC
Power dissipation	500 mW (at 24 V DC / 20 mA)
Power consumption	≤ 700 mW

Signal: Voltage/current
Number of inputs	1
Voltage input signal	0 mV ... 50 mV
		0 mV ... 60 mV
		0 mV ... 75 mV
		0 mV ... 100 mV
		0 mV ... 120 mV
		0 mV ... 150 mV
		0 mV ... 200 mV
		0 mV ... 300 mV
		0 mV ... 500 mV
		0 V ... 1 V
		0 V ... 1.5 V
		0 V ... 2 V
		0 V ... 3 V
		0 V ... 5 V
		0 V ... 10 V (Configurable via DIP switches)
		0 V ... 15 V
		0 V ... 20 V
		0 V ... 30 V
		0 V ... 50 V
		0 V ... 100 V
		-50 mV ... 50 mV
		-60 mV ... 60 mV
		-75 mV ... 75 mV
		-100 mV ... 100 mV
		-120 mV ... 120 mV
		-150 mV ... 150 mV
		-200 mV ... 200 mV
		-300 mV ... 300 mV
		-500 mV ... 500 mV
		-1 V ... 1 V
		-1.5 V ... 1.5 V
		-2 V ... 2 V
		-3 V ... 3 V
		-5 V ... 5 V
		-10 V ... 10 V
		-15 V ... 15 V
		-20 V ... 20 V
		-30 V ... 30 V
		-50 V ... 50 V
		-100 V ... 100 V
		1 V ... 5 V
		2 V ... 10 V
Min. voltage input signal	± 50 mV
Max. voltage input signal	± 100 V
Current input signal	0 mA ... 1 mA (Configurable via DIP switches)
		0 mA ... 1.5 mA
		0 mA ... 2 mA
		0 mA ... 3 mA
		0 mA ... 5 mA
		0 mA ... 10 mA
		0 mA ... 15 mA
		0 mA ... 20 mA
		0 mA ... 30 mA
		0 mA ... 50 mA
		0 mA ... 100 mA
		-1 mA ... 1 mA
		-1.5 mA ... 1.5 mA
		-2 mA ... 2 mA
		-3 mA ... 3 mA
		-5 mA ... 5 mA
		-10 mA ... 10 mA
		-15 mA ... 15 mA
		-20 mA ... 20 mA
		-30 mA ... 30 mA
		-50 mA ... 50 mA
		-100 mA ... 100 mA
		1 mA ... 5 mA
		2 mA ... 10 mA
		4 mA ... 20 mA
Minimum current input signal	± 1 mA
Max. current input signal	± 100 mA
Input resistance of voltage input	approx. 1 MΩ (±1 V DC ... ±100 V DC)
Input resistance current input	approx. 10 Ω (±10 mA DC ... ±100 mA DC)

Signal: Voltage/current
Number of outputs	1
Configurable/programmable	Yes, can be switched
Voltage output signal	0 V ... 10 V (Configurable via DIP switches)
		0 V ... 5 V
		2 V ... 10 V
		1 V ... 5 V
		-10 V ... 10 V
		-5 V ... 5 V
		0 V ... 2.5 V
		0.5 V ... 2.5 V
		-2.5 V ... 2.5 V
Output signal voltage inverse	0 V ... 2.5 V
		0 V ... 5 V
		0 V ... 10 V
Current output signal	0 mA ... 5 mA
		0 mA ... 10 mA
		0 mA ... 20 mA (Configurable via DIP switches)
		1 mA ... 5 mA
		2 mA ... 10 mA
		4 mA ... 20 mA
		-5 mA ... 5 mA
		-10 mA ... 10 mA
		-20 mA ... 20 mA
Output signal current inverse	0 mA ... 5 mA
		0 mA ... 10 mA
		0 mA ... 20 mA
Load/output load voltage output	≥ 1 kΩ (10 V)
Load/output load current output	≤ 600 Ω (20 mA; active)
Load/output load current output		passive: ≤ (UB-2 V) / I_outmax
Ripple	< 10 mV_rms

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Dimensional drawing
Width	12.5 mm
Height	116 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Housing material

PA 6.6-FR

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-20 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude range (≤ 2000 m)
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	-20 °C ... 70 °C
Altitude range (≤ 3000 m)
Height range	> 2000 m ... 3000 m
Ambient temperature (operation)	-20 °C ... 60 °C
Rated insulation voltage	190 V
Altitude range (≤ 4000 m)
Height range	> 3000 m ... 4000 m
Ambient temperature (operation)	-20 °C ... 55 °C
Rated insulation voltage	63 V
Altitude range (≤ 5000 m)
Height range	> 4000 m ... 5000 m
Ambient temperature (operation)	-20 °C ... 45 °C
Rated insulation voltage	63 V

CE
Certificate	CE-compliant
ATEX
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	BVS 10 ATEX E 059 X
UKCA Ex (UKEX)
Identification	 II 3 G Ex nA IIC T4 Gc
Certificate	PxCIF21UKEX2811284X
IECEx
Identification	Ex ec IIC T4 Gc
Certificate	IECEx BVS 10.0044X
CCC / China-Ex
Identification	Ex ec IIC T4 Gc
Certificate	2021122304114077
UL, USA/Canada
Identification	UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T6
		Class I, Zone 2, Group IIC
Shipbuilding approval
Certificate	DNV GL TAA000020C
Safety Integrity Level (SIL, IEC 61508)
Identification	2
INMETRO
Identification	Ex ec IIC T4 Gc
Certificate	DNV 21.0063 X
EAC Ex
Identification	 2Ex ec IIC T4 Gc
Certificate	BY/112 02.01 TP012 103.01 00078
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	1 %
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	1 %
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	1 %