MACX MCR-SL-UI-REL-SP - Limit value switches Phoenix Contact

Mã sản phẩm: 2906170

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Limit value switch with input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, Push-in connection.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Threshold value switch
Product family	MACX Analog
Type	Signal conditioners with SIL and PL Functional Safety
Configuration	DIP switches
Insulation characteristics: GB Standard
Overvoltage category	II
Pollution degree	2

Functionality
Configuration	DIP switches

Electrical isolation	3-way isolation
Switching point accuracy	< 0.1 %
Step response (0–99%)	≤ 22 ms
Maximum temperature coefficient	0.01 %/K
Maximum transmission error	0.1 %
Electrical isolation Output/supply
Rated insulation voltage	250 V AC (IEC/EN 60079-7)
Electrical isolation Input/output/power supply
Rated insulation voltage	300 V AC (EN 61010-1)
Test voltage	2.5 kV AC (50 Hz, 60 s)
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Input/output, power supply
Rated insulation voltage	375 V AC (IEC/EN 60079-7)
Supply
Nominal supply voltage	24 V DC
Supply voltage range	9.6 V DC ... 30 V DC (12 V DC ... 24 V DC (-20 % ... +25 %))
Typical current consumption	38 mA (24 V DC)
Max. current consumption	90 mA (10 V DC)
Power dissipation	< 0.9 W
Power consumption	≤ 1.2 W

Signal: Voltage/current
Voltage input signal	0.1 V ... 10 V
Voltage input signal		0.1 V ... 10.5 V (Maximum range)
Total error of the voltage input maximum	± 10 mV
Current input signal	0.2 mA ... 20 mA
Current input signal		0.18 mA ... 21 mA (Maximum range)
Total error of the current input maximum	± 20 µA
Input resistance of voltage input	> 100 kΩ
Input resistance current input	< 28 Ω
Switching threshold "0" signal current	Configurable via DIP switch (in 1.25% increments) and potentiometer (linearly up to 2% of the switching threshold set via the DIP switch)
Switching hysteresis	off: approx. 0.5 %, on: approx. 1 %
Line fault detection	< 0.1 mA (Line break)
Line fault detection		> 21.1 mA (Short circuit)

Switching: Relay
Contact type	1 changeover contact
Contact material	AgSnO₂, hard gold-plated
Max. switching current	≤ 4 A AC (cos phi = 1)
		≤ 1 A DC (ohmic load, 24 V DC, 50 mW)
		≤ 0.2 A DC (ohmic load, 120 V DC)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Test socket
Max. diameter	2 mm

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Status display	Green LED (supply voltage)
		Yellow LED (switching output)
		Red LED, flashing (line, sensor error, ERR)

Width	12.5 mm
Height	116 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 65 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
Note	and EN 61326
ATEX
Identification	 II 3G Ex ec nC IIC T4 Gc
Certificate	TÜV 18 ATEX 8222 X
UKCA Ex (UKEX)
Identification	 II 3 G Ex ec nC IIC T4 Gc
Certificate	PxCIF21UKEX2906169X
IECEx
Identification	Ex ec nC IIC T4 Gc
Certificate	IECEx TUR 18.0014X
CCC / China-Ex
Identification	Ex ec nC IIC T4 Gc
Certificate	2022122304115959
INMETRO
Identification	Ex ec nC IIC T4 Gc
Certificate	DNV 21.0089 X
UL, USA/Canada
Identification	UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate	DNV GL TAA000020C
EAC
Identification	2Ex e nC IIC T4 Gc X
Certificate	RU C-DE.HB49.B.00145/21
Safety Integrity Level (SIL, IEC 61508)
Identification	2
Certificate	TÜV Rheinland 968/FSP 1481.00/17
Note	Single-channel
Safety Integrity Level (SIL, IEC 61508)
Identification	3
Certificate	TÜV Rheinland 968/FSP 1481.00/17
Note	Two-channel
Systematic Capability
Identification	3
Performance Level (ISO 13849)
Identification	c
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4