MACX MCR-SL-RPSSI-2I - Repeater power supply Phoenix Contact

Mã sản phẩm: 2924825

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Measuring transducer repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4…20 mA electrically isolated signals from the field to two loads. 4-way electrical isolation, screw connection, SIL, PL.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Repeater power supplies
Product family	MACX Analog
No. of channels	1
Type	Signal conditioners with SIL and PL Functional Safety
Insulation characteristics
Overvoltage category	II
Pollution degree	2

No. of channels	1
Electrical isolation	3-way isolation
Electrical isolation between input and output	yes
Maximum power dissipation for nominal condition	1.45 W (24 V DC / 20 mA)
Signal transmission behavior	In = Out
Step response (10-90%)	1.3 ms (for jump 4 mA ... 20 mA, typical)
Maximum temperature coefficient	< 0.01 %/K
Maximum transmission error	< 0.1 % (of final value)
Transmission error, typical	< 0.05 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage	300 V_rms
Test voltage	2.5 kV AC (50 Hz, 60 s)
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Output 1/output 2
Test voltage	1.5 kV AC (50 Hz, 60 s)
Supply
Designation	Repeater power supply operation
Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption	< 75 mA (24 V DC / 20 mA)
Power dissipation	< 1.45 W (24 V DC / 20 mA)
Supply
Designation	Signal conditioner operation
Nominal supply voltage	24 V DC
Nominal supply voltage range	19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption	< 46 mA (24 V DC / 20 mA)
Power dissipation	< 1.2 W (24 V DC / 20 mA)

Signal: Repeater power supply operation
Description of the input	Repeater power supply operation
Number of inputs	1
Current input signal	4 mA ... 20 mA
Transmitter supply voltage	> 21.5 V (20 mA)
Transmitter supply voltage		> 21 V (23 mA)
Underload/overload signal range	0 mA ... 24 mA (Extended transmission range for diagnostics)
Signal: Signal conditioner operation
Description of the input	Signal conditioner operation
Current input signal	0 mA ... 20 mA
Current input signal		4 mA ... 20 mA
Voltage drop	< 3.9 V (in input isolating amplifier operation)
Underload/overload signal range	0 mA ... 24 mA (Extended transmission range for diagnostics)

Signal: Repeater power supply operation
Output description	Repeater power supply operation
Number of outputs	2
Current output signal	4 mA ... 20 mA (active)
Current output signal		0 mA ... 20 mA
Load/output load current output	< 450 Ω (20 mA)
Load/output load current output		< 380 Ω (23 mA)
Output ripple	< 20 mV_rms
Output behavior in the event of an error	0 mA (Cable break in the input)
Output behavior in the event of an error		≥ 23 mA (Cable short-circuit in the input)
Underload/overload signal range	0 mA ... 24 mA (Extended transmission range for diagnostics)
Signal: Signal conditioner operation
Output description	Signal conditioner operation
Current output signal	0 mA ... 20 mA (active)
Current output signal		4 mA ... 20 mA (active)
Load/output load current output	< 450 Ω (20 mA)
Load/output load current output		< 380 Ω (23 mA)
Output ripple	< 20 mV_rms
Output behavior in the event of an error	0 mA (Cable break in the input)
Output behavior in the event of an error		0 mA (Cable short-circuit in the input)
Underload/overload signal range	0 mA ... 24 mA (Extended transmission range for diagnostics)

Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
Test socket
Max. diameter	2.3 mm

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Data communication (bypass)
HART function	Yes
Protocols supported	HART-transparent

Status display

Green LED (supply voltage)

Width	12.5 mm
Height	112.5 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-40 °C ... 70 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
Note	and EN 61326-1
ATEX
Identification	 II 3 G Ex nA IIC T4 Gc X
Certificate	PxCCIF11ATEX2924825
UKCA Ex (UKEX)
Identification	 II 3 G Ex nA IIC T4 Gc
Certificate	PxCIF21UKEX2924825X
UL, USA/Canada
Identification	UL 508 Listed
		UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Zone 2, Groups IIC, IIB, IIA T4
UL, USA/Canada
Identification	UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate	DNV GL TAA000020C
Safety Integrity Level (SIL, IEC 61508)
Identification	2
Performance Level (ISO 13849)
Identification	d
EAC Ex
Identification	 2Ex nA IIC T4 Gc
Certificate	BY/112 02.01 TP012 103.01 00078
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	3 %
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	3 %
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	3 %