MACX MCR-SL-NAM-R - Isolation amplifier Phoenix Contact

Mã sản phẩm: 2865997

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

NAMUR signal conditioners for operating proximity sensors and switches. The signals are transmitted to the control level via relay output (changeover contact). Line fault detection (LFD), 3-way electrical isolation, SIL 2, with screw connection.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Isolating switch transf.
Product family	MACX Analog
Application	Digital IN
No. of channels	1
Type	Signal conditioners with SIL functional safety
Configuration	DIP switches

Functionality
Configuration	DIP switches

No. of channels	1
Electrical isolation	3-way isolation
Electrical isolation between input and output	yes
Maximum power dissipation for nominal condition	< 650 mW
Electrical isolation Input/output
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Overvoltage category	II
Degree of pollution	2
Electrical isolation Input/output/supply, DIN rail connector
Rated insulation voltage	300 V_rms
Test voltage	2.5 kV AC (50 Hz, 60 s)
Overvoltage category	II
Degree of pollution	2
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Output/input, supply, TBUS
Rated insulation voltage	300 V_rms
Test voltage	2.5 kV AC (50 Hz, 60 s)
Overvoltage category	III
Degree of pollution	2
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Input/supply, DIN rail connector
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Overvoltage category	II
Degree of pollution	2
Supply
Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption	21 mA (24 V DC)
Power dissipation	< 650 mW
Power consumption	< 650 mW

Signal: NAMUR
Number of inputs	1
Available input sources	NAMUR proximity sensors (IEC/EN 60947-5-6)
		Floating switch contacts
		Switch contacts with resistance circuit
Switching threshold "0" signal current	< 1.2 mA (blocking)
Switching threshold "1" signal, current	> 2.1 mA (conductive)
Short-circuit current	8 mA
Switching hysteresis	< 0.2 mA
Line fault detection	< 0.05 mA ... 0.35 mA (Line break)
		< 100 Ω ... 360 Ω (Short circuit)
		Activated /deactivated via DIP switch
Non-load voltage	8 V DC

Switching: Relay
Contact type	1 changeover contact
Contact material	AgSnO₂, hard gold-plated
Maximum switching voltage	250 V AC (2 A)
		120 V DC (0.2 A)
		30 V DC (2 A)
Maximum switching capacity	500 VA
Recommended minimum load	5 V / 10 mA
Switching frequency	≤ 20 Hz (without load)
Signal
Number of outputs	1

Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Data
No. of channels	0

Status display	Green LED (supply voltage)
		LED yellow (switching state)
		Red LED (line errors)

Dimensional drawing
Width	12.5 mm
Height	112.5 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Safety Integrity Level (SIL)	2
Safety data: IEC 61508 - Low demand
Designation	Non-inverted operation
Equipment type	Type A
Safety Integrity Level (SIL)	2
Safe Failure Fraction (SFF)	78 %
λ_SU	2.49 x 10^-7 (249 FIT)
λ_SD	6 x 10^-9 (6 FIT)
λ_DU	6.4 x 10^-8 (64 FIT)
λ_DD	7 x 10^-9 (7 FIT)
Probability of a hazardous failure on demand (PFD_AVG)	3.09 x 10^-4 (1 year)
		6.17 x 10^-4 (2 years)
		1.54 x 10^-3 (5 years)
Diagnostic coverage (DC)	DC_S = 2.4 %, DC_D = 9 %
Designation	Inverted operation
Equipment type	Type A
Safety Integrity Level (SIL)	2
Safe Failure Fraction (SFF)	78 %
λ_SU	2.48 x 10^-7 (248 FIT)
λ_SD	1 x 10^-9 (1 FIT)
λ_DU	6.2 x 10^-8 (62 FIT)
λ_DD	6 x 10^-9 (6 FIT)
Probability of a hazardous failure on demand (PFD_AVG)	3.01 x 10^-4 (1 year)
		6.02 x 10^-4 (2 years)
		1.5 x 10^-3 (5 years)
Diagnostic coverage (DC)	DC_S = 0.4 %, DC_D = 8 %

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-40 °C ... 70 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)
Altitude range (≤ 2000 m)
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	-40 °C ... 60 °C
Rated insulation voltage	320 V (Power supply, input / output)
Altitude range (≤ 3000 m)
Height range	> 2000 m ... 3000 m
Ambient temperature (operation)	-40 °C ... 54 °C
Rated insulation voltage	190 V (Power supply, input / output)
Altitude range (≤ 4000 m)
Height range	> 3000 m ... 4000 m
Ambient temperature (operation)	-40 °C ... 48 °C
Rated insulation voltage	63 V (Power supply, input / output)
Altitude range (≤ 5000 m)
Height range	> 4000 m ... 5000 m
Ambient temperature (operation)	-40 °C ... 42 °C
Rated insulation voltage	63 V (Power supply, input / output)

CE
Certificate	CE-compliant
Note	and EN 61326-1
ATEX
Identification	 II 3G Ex ec nC IIC T4 Gc
Certificate	IBExU 07 ATEX 1069 X
UKCA Ex (UKEX)
Identification	 II 3G Ex ec nC IIC T4 Gc
Certificate	PxCIF21UKEX2865049X
IECEx
Identification	Ex ec nC IIC T4 Gc
Certificate	IBE 08.0001 X
CCC / China-Ex
Identification	Ex nA nC IIC T4 Gc
UL, USA/Canada
Identification	UL 508 Listed
		UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate	DNV GL TAA00000AG
Safety Integrity Level (SIL, IEC 61508)
Identification	2
INMETRO
Identification	Ex ec nC IIC T4 Gc
Certificate	DNV 18.0114 X
EAC Ex
Identification	 2Ex ec nC IIC T4 Gc
Certificate	BY/112 02.01 TP012 103.01 00078
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board