MACX MCR-SL-2NAM-RO-SP - Isolation amplifier Phoenix Contact

Mã sản phẩm: 2924294

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

NAMUR 2-channel signal conditioner for operating proximity sensors and switches. The signals are transferred to the control level using relay outputs (N/O contact). Line fault detection, 3-way electrical isolation, SIL 2, Push-in connection.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Isolating switch transf.
Product family	MACX Analog
Application	Digital IN
No. of channels	2
Type	Signal conditioners with SIL functional safety
Configuration	DIP switches

Functionality
Configuration	DIP switches

No. of channels	2
Electrical isolation	3-way isolation
Electrical isolation between input and output	yes
Maximum power dissipation for nominal condition	< 1 W
Electrical isolation Input/output
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Overvoltage category	III
Degree of pollution	2
Electrical isolation Input/supply, DIN rail connector
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Rated insulation voltage	300 V_rms
Overvoltage category	II
Degree of pollution	2
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Output 1/output 2/input, power supply, DIN rail connector
Rated insulation voltage	300 V_rms
Overvoltage category	III
Degree of pollution	2
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Output 1/output 2/input/power supply, DIN rail connector
Test voltage	2.5 kV AC (50 Hz, 60 s)
Overvoltage category	III
Degree of pollution	2
Supply
Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption	35 mA (24 V DC)
Power dissipation	< 1 W
Power consumption	< 1 W

Signal: NAMUR
Number of inputs	2
Available input sources	NAMUR proximity sensors (IEC/EN 60947-5-6)
		Floating switch contacts
		Switch contacts with resistance circuit
Switching threshold "0" signal current	< 1.2 mA (blocking)
Switching threshold "1" signal, current	> 2.1 mA (conductive)
Short-circuit current	8 mA
Switching hysteresis	< 0.2 mA
Line fault detection	< 0.05 mA ... 0.35 mA (Line break)
		< 100 Ω ... 360 Ω (Short circuit)
		Activated /deactivated via DIP switch
Non-load voltage	8 V DC

Switching: Relay
Contact type	1 N/O contact per channel
Contact material	AgSnO₂, hard gold-plated
Maximum switching voltage	250 V AC (2 A)
		120 V DC (0.2 A)
		30 V DC (2 A)
Maximum switching capacity	500 VA
Recommended minimum load	5 V / 10 mA
Switching frequency	≤ 20 Hz (without load)
Signal
Number of outputs	2

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Data
No. of channels	0

Status display	Green LED (supply voltage)
		LED yellow (switching state)
		Red LED (line errors)

Dimensional drawing
Width	12.5 mm
Height	116 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Safety Integrity Level (SIL)	2
Safety data: IEC 61508 - Low demand
Designation	Non-inverted operation
Equipment type	Type A
Safety Integrity Level (SIL)	2
Safe Failure Fraction (SFF)	78 %
λ_SU	2.49 x 10^-7 (249 FIT)
λ_SD	6 x 10^-9 (6 FIT)
λ_DU	6.4 x 10^-8 (64 FIT)
λ_DD	7 x 10^-9 (7 FIT)
Probability of a hazardous failure on demand (PFD_AVG)	3.09 x 10^-4 (1 year)
		6.17 x 10^-4 (2 years)
		1.54 x 10^-3 (5 years)
Diagnostic coverage (DC)	DC_S = 2.4 %, DC_D = 9 %
Designation	Inverted operation
Equipment type	Type A
Safety Integrity Level (SIL)	2
Safe Failure Fraction (SFF)	78 %
λ_SU	2.48 x 10^-7 (248 FIT)
λ_SD	1 x 10^-9 (1 FIT)
λ_DU	6.2 x 10^-8 (62 FIT)
λ_DD	6 x 10^-9 (6 FIT)
Probability of a hazardous failure on demand (PFD_AVG)	3.01 x 10^-4 (1 year)
		6.02 x 10^-4 (2 years)
		1.5 x 10^-3 (5 years)
Diagnostic coverage (DC)	DC_S = 0.4 %, DC_D = 8 %

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-40 °C ... 70 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Altitude range (≤ 2000 m)
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	-40 °C ... 60 °C
Rated insulation voltage	320 V (Power supply, input / output)
Altitude range (≤ 3000 m)
Height range	> 2000 m ... 3000 m
Ambient temperature (operation)	-40 °C ... 54 °C
Rated insulation voltage	190 V (Power supply, input / output)
Altitude range (≤ 4000 m)
Height range	> 3000 m ... 4000 m
Ambient temperature (operation)	-40 °C ... 48 °C
Rated insulation voltage	63 V (Power supply, input / output)
Altitude range (≤ 5000 m)
Height range	> 4000 m ... 5000 m
Ambient temperature (operation)	-40 °C ... 42 °C
Rated insulation voltage	63 V (Power supply, input / output)

CE
Certificate	CE-compliant
Note	and EN 61326-1
ATEX
Identification	 II 3G Ex ec nC IIC T4 Gc
Certificate	IBExU 07 ATEX 1069 X
UKCA Ex (UKEX)
Identification	 II 3G Ex ec nC IIC T4 Gc
Certificate	PxCIF21UKEX2865049X
IECEx
Identification	Ex ec nC IIC T4 Gc
Certificate	IBE 08.0001 X
CCC / China-Ex
Identification	Ex nA nC IIC T4 Gc
UL, USA/Canada
Identification	UL 508 Listed
		UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate	DNV GL TAA00000AG
Safety Integrity Level (SIL, IEC 61508)
Identification	2
INMETRO
Identification	Ex ec nC IIC T4 Gc
Certificate	DNV 18.0114 X
EAC Ex
Identification	 2Ex ec nC IIC T4 Gc
Certificate	BY/112 02.01 TP012 103.01 00078
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Noise immunity		EN 61326
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Evaluation criterion	A
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Evaluation criterion	A
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Evaluation criterion	A