MACX MCR-S-MUX-TB-1 - HART transfer board Phoenix Contact

Mã sản phẩm: 1292339

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

The HART termination board is used to apply the signals from the HART-compatible signal converters or field devices and transmit them to the MACX MCR-S-MUX HART multiplexer. The output terminal strip ensures that the analog signals are forwarded.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

Installation conditions influence the ambient temperature.
Please refer to the “Control cabinet installation instructions”.

Product type	Multiplexer
Product family	MACX Analog
No. of channels	16

No. of channels	16
Reverse polarity protection	yes
Supply
Nominal supply voltage	24 V DC
Supply voltage range	19 V ... 31.2 V

Signal
Description of the input	HART
Input signal	Current
Current input signal	4 mA ... 20 mA (HART)

Signal
Output description	HART
Current output signal	4 mA ... 20 mA (HART)

Supply
Connection method	Screw terminal blocks
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross-section rigid (2 conductors with same cross section)	0.2 mm² ... 1 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
		0.25 mm² ... 2.5 mm² (Ferrules without plastic sleeve)
		0.25 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)	0.2 mm² ... 1.5 mm²
		0.25 mm² ... 0.5 mm² (Ferrule without / with plastic sleeve)
Signal level
Connection method	Screw terminal blocks
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section rigid (2 conductors with same cross section)	0.2 mm² ... 1 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section flexible		0.25 mm² ... 1.5 mm² (Ferrule without / with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)	0.2 mm² ... 0.25 mm²
		0.25 mm² ... 0.5 mm² (Ferrules without plastic sleeve)

Ex installation (EPL)

Width	127 mm
Height	125.4 mm
Depth	82.3 mm

Flammability rating according to UL 94	V0
Housing material	Polyamide (PA 6.6)

Ambient conditions
Degree of protection	IP20 (Terminal blocks)
Degree of protection		IP00 (Housing)
Ambient temperature (operation)	-20 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	≤ 95 % (non-condensing)