MACX MCR-RTD-I-SP-C - Temperature measuring transducer Phoenix Contact

Mã sản phẩm: 1052464

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, Push-in connection, SIL, 3-way electrical isolation, order configuration.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Temperature transmitter
Product family	MACX Analog
Application	Temperature
No. of channels	1
Type	Signal conditioners with SIL functional safety
Configuration	Software
Insulation characteristics: GB Standard
Overvoltage category	II
Pollution degree	2

Alignment span	± 5 %
Alignment zero	± 5 %
No. of channels	1
Electrical isolation	3-way isolation
Electrical isolation between input and output	yes
Step response (0–99%)	1 s
Step response (0–99%)		≤ 1.7 s
Temperature coefficient, typical	0.01 %/K
Transmission error, typical	0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA)
Electrical isolation Input/output/power supply
Rated insulation voltage	300 V_rms
Test voltage	2.5 kV AC (50 Hz, 60 s)
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Input/output
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Electrical isolation Input/power supply
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Supply
Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Power dissipation	≤ 0.76 W
Power consumption	≤ 1 W

Signal
Number of inputs	1
Measurement
Sensor types (RTD) that can be used	Pt, Ni, Cu sensors: 2, 3, 4-wire
Temperature measuring range	-200 °C ... 850 °C (Range depending on the sensor type)
Linear resistance measuring range	0 Ω ... 50 kΩ
Potentiometer resistance range	0 Ω ... 50 kΩ
Max. permissible overall conductor resistance	50 Ω (Per cable)
Sensor input current	10 µA ... 210 µA (Up to 2x 210 µA with 3-conductor technology)
Temperature measuring range	≥ 50 K

Signal: Current
Number of outputs	1
Configurable/programmable	Yes
Current output signal	0 mA ... 20 mA
Current output signal		4 mA ... 20 mA (SIL)
Max. current output signal	≥ 21 mA
Load/output load current output	≤ 600 Ω
Output ripple (current)	< 15 µA_PP
Output ripple (current)		< 10 µA_rms
Behavior in the event of a sensor error	As per NE 43 or can be freely defined

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Status display	Green LED (supply voltage)
		Red LED, flashing 2.4 Hz (cable error, sensor error on input or output, ERR)
		Red LED, flashing 1.2 Hz (service operation, ERR)
		Red LED, permanently on (module error, ERR)

Width	12.5 mm
Height	116 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Altitude range (≤ 2000 m)
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	70 °C
Test voltage	2.5 kV
Rated insulation voltage	300 V_rms
Altitude range (≤ 3000 m)
Height range	> 2000 m ... 3000 m
Ambient temperature (operation)	63 °C
Test voltage	2.25 kV
Rated insulation voltage	150 V_rms
Altitude range (≤ 4000 m)
Height range	> 3000 m ... 4000 m
Ambient temperature (operation)	56 °C
Test voltage	2 kV
Rated insulation voltage	150 V_rms
Altitude range (≤ 5000 m)
Height range	> 4000 m ... 5000 m
Ambient temperature (operation)	49 °C
Test voltage	1.75 kV
Rated insulation voltage	150 V_rms

CE
Certificate	CE-compliant
Note	and EN 61326
ATEX
Identification	 II 3 G Ex ec ic IIC T4 Gc
Certificate	PxCIF19ATEX1050192X
UKCA Ex (UKEX)
Identification	 II 3 G Ex ec ic IIC T4 Gc
Certificate	CML 22UKEX3531X
IECEx
Identification	Ex ec ic IIC T4 Gc
Certificate	IECEx IBE 19.0001 X
CCC / China-Ex
Identification	Ex nA ic IIC T4 Gc
Certificate	NEPSI GYJ20.1305X
UL, USA/Canada
Identification	UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate	DNV GL TAA00000AG
Safety Integrity Level (SIL, IEC 61508)
Identification	2
EAC Ex
Identification	 2Ex ec ic IIC T4 Gc
Certificate	BY/112 02.01 TP012 103.01 00082
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	1 %
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	1 %
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	1 %