MACX MCR-IDS-2I-2I - Output signal conditioner Phoenix Contact

Mã sản phẩm: 2908065

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

2-channel output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA ... 20 mA signals to a load in the safe area. 4-way electrical isolation, line fault detection, SIL 2 (SC3) in accordance with IEC 61508, screw connection.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Output signal conditioner
Product family	MACX Analog
No. of channels	2
Type	Signal conditioners with SIL functional safety
Insulation characteristics: GB Standard
Overvoltage category	II
Pollution degree	2

No. of channels	2
Electrical isolation	3-way isolation
Signal transmission behavior	In = Out
Step response (10-90%)	< 140 µs (for 4 mA ... 20 mA step)
Maximum temperature coefficient	0.01 %/K
Temperature coefficient, typical	≤ 0.005 %/K
Maximum transmission error	0.1 % (of final value)
Transmission error, typical	≤ 0.05 % (of final value)
Electrical isolation Input/output
Rated insulation voltage	300 V_rms
Test voltage	2.5 kV AC (50 Hz, 60 s)
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Input/power supply
Rated insulation voltage	50 V_rms
Test voltage	1.5 kV AC (50 Hz, 60 s)
Insulation	Basic insulation in accordance with IEC/EN 61010-1
Electrical isolation Output/supply
Rated insulation voltage	300 V_rms
Test voltage	2.5 kV AC (50 Hz, 60 s)
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Input 1/input 2, output 1/output 2
Test voltage	1.5 kV AC (50 Hz, 60 s)
Supply
Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption	< 85 mA (at 24 V DC / 20 mA)
Power dissipation	< 1.4 W (at 24 V DC / 20 mA)
Power consumption	≤ 2 W (at 24 V DC / 20 mA)

Signal: Current
Current input signal	0.2 mA ... 20 mA (Function)
		4 mA ... 20 mA (Safety)
		0 mA ... 24 mA (Underload/overload range)
Input current	≤ 30 mA
Input impedance	> 1 MΩ (If there is a line fault)
Line fault detection	> 0.2 mA (Response threshold of input current)
Voltage drop	< 2.4 V (at 20 mA)

Signal: Current
Number of outputs	2
Current output signal	0.2 mA ... 20 mA (Function)
		4 mA ... 20 mA (Safety)
		0 mA ... 24 mA (Underload/overload range)
Load	100 Ω ... 700 Ω (20 mA)
		100 Ω ... 650 Ω (20.5 mA)
		100 Ω ... 500 Ω (24 mA)
Output ripple	< 20 mV_rms
Non-load voltage	≤ 27 V
Line fault detection	> 10 kΩ (Line break)
Line fault detection		< 50 Ω (Short circuit)

Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
COMBICON connection
Max. diameter	2 mm

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Data communication (bypass)
HART function	Yes
Protocols supported	HART-transparent

Status display

Green LED (supply voltage)

Width	12.5 mm
Height	112.5 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Altitude range (≤ 2000 m (Ex))
Description	Ex applications
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	-40 °C ... 70 °C
Rated insulation voltage	320 V (Power supply, input / output)
Altitude range (≤ 3000 m (Ex))
Description	Ex applications
Height range	> 2000 m ... 3000 m
Ambient temperature (operation)	-40 °C ... 60 °C
Rated insulation voltage	190 V (Power supply, input / output)
Altitude range (≤ 4000 m (Ex))
Description	Ex applications
Height range	> 3000 m ... 4000 m
Ambient temperature (operation)	-40 °C ... 55 °C
Rated insulation voltage	63 V (Power supply, input / output)
Altitude range (≤ 5000 m (Ex))
Description	Ex applications
Height range	> 4000 m ... 5000 m
Ambient temperature (operation)	-40 °C ... 45 °C
Rated insulation voltage	63 V (Power supply, input / output)
Altitude range (≤ 2000 m)
Description	Non-Ex applications (EN 61010-1)
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	-40 °C ... 70 °C
Rated insulation voltage	300 V (Power supply, input / output)
Altitude range (≤ 3000 m)
Description	Non-Ex applications (EN 61010-1)
Height range	> 2000 m ... 3000 m
Ambient temperature (operation)	-40 °C ... 60 °C
Rated insulation voltage	150 V (Power supply, input / output)
Altitude range (≤ 4000 m)
Description	Non-Ex applications (EN 61010-1)
Height range	> 3000 m ... 4000 m
Ambient temperature (operation)	-40 °C ... 55 °C
Rated insulation voltage	150 V (Power supply, input / output)
Altitude range (≤ 5000 m)
Description	Non-Ex applications (EN 61010-1)
Height range	> 4000 m ... 5000 m
Ambient temperature (operation)	-40 °C ... 45 °C
Rated insulation voltage	150 V (Power supply, input / output)

CE
Certificate	CE-compliant
Note	and EN 61326
ATEX
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	BVS 20 ATEX E 003 X
UKCA Ex (UKEX)
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	PxCIF21UKEx2908065X
IECEx
Identification	Ex ec IIC T4 Gc
Certificate	IECEx BVS 20.0003X
CCC / China-Ex
Identification	Ex ec IIC T4 Gc
Certificate	2021122304114079
INMETRO
Identification	Ex ec IIC T4 Gc
Certificate	DNV 21.0092 X
UL, USA/Canada
Identification	UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate	DNV GL TAA00000AG
EAC
Identification	2Ex e IIC T4 Gc X
Certificate	RU C-DE.HB49.B.00145/21
Safety Integrity Level (SIL, IEC 61508)
Identification	3
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4