MACX MCR-EX-SL-2NAM-RO-SP - Isolation amplifier Phoenix Contact

Mã sản phẩm: 2924087

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Isolating switch transf.
Product family	MACX Analog
Application	Digital IN
No. of channels	2
Type	Ex i signal conditioners with SIL functional safety
Configuration	DIP switches

Functionality
Configuration	DIP switches

No. of channels	2
Electrical isolation	3-way isolation
Electrical isolation between input and output	yes
Maximum power dissipation for nominal condition	< 1 W
Electrical isolation Input/output
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Overvoltage category	III
Degree of pollution	2
Electrical isolation Input/supply, DIN rail connector
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Rated insulation voltage	300 V_rms
Overvoltage category	II
Degree of pollution	2
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Output 1/output 2/input, power supply, DIN rail connector
Rated insulation voltage	300 V_rms
Overvoltage category	III
Degree of pollution	2
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Output 1/output 2/input/power supply, DIN rail connector
Test voltage	2.5 kV AC (50 Hz, 60 s)
Overvoltage category	III
Degree of pollution	2
Supply
Nominal supply voltage	24 V DC -20 % ... +25 %
Supply voltage range	19.2 V DC ... 30 V DC
Max. current consumption	35 mA (24 V DC)
Power dissipation	< 1 W
Power consumption	0.8 W

Signal: NAMUR
Description of the input	Intrinsically safe
Number of inputs	2
Available input sources	NAMUR proximity sensors (IEC/EN 60947-5-6)
		Floating switch contacts
		Switch contacts with resistance circuit
Switching threshold "0" signal current	< 1.2 mA (blocking)
Switching threshold "1" signal, current	> 2.1 mA (conductive)
Short-circuit current	8 mA
Switching hysteresis	< 0.2 mA
Line fault detection	< 0.05 mA ... 0.35 mA (Line break)
		< 100 Ω ... 360 Ω (Short circuit)
		Activated /deactivated via DIP switch
Non-load voltage	8 V DC

Switching: Relay
Contact type	1 N/O contact per channel
Contact material	AgSnO₂, hard gold-plated
Maximum switching voltage	250 V AC (2 A)
		120 V DC (0.2 A)
		30 V DC (2 A)
Maximum switching capacity	500 VA
Recommended minimum load	5 V / 10 mA
Switching frequency	≤ 20 Hz (without load)
Signal
Number of outputs	2

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2
Ex i circuits (EPL)	Ga
		Da
		Ma
		Div. 1
Safety data
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	11 nF
Max. output voltage U_o	9.6 V
Max. output current I_o	10 mA
Max. output power P_o	25 mW
Safety-related maximum voltage U_m	253 V AC
Safety-related maximum voltage U_m		125 V DC
IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	300 mH / 3.6 µF
IIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 500 nF, 50 mH / 570 nF, 5 mH / 590 nF, 1 mH / 590 nF, 10 µH / 590 nF
IIB/IIIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	1000 mH / 26 µF
I/IIB/IIA/IIIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 1 µF, 5 mH / 1 µF, 1 mH / 1 µF, 10 µH / 1 µF
IIA/I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	1000 mH / 210 µF

Data
No. of channels	0

Status display	Green LED (supply voltage)
		LED yellow (switching state)
		Red LED (line errors)

Dimensional drawing
Width	12.5 mm
Height	116 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Safety data: IEC 61508 - Low demand
Designation	Non-inverted operation
		Inverted operation

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-40 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)
Altitude range (≤ 2000 m)
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	-40 °C ... 60 °C
Rated insulation voltage	375 V_PP (Power supply, input / output)
Altitude range (≤ 3000 m)
Height range	> 2000 m ... 3000 m
Ambient temperature (operation)	-40 °C ... 54 °C
Rated insulation voltage	190 V AC (Power supply, input / output)
Rated insulation voltage		110 V DC (Power supply, input / output)
Altitude range (≤ 4000 m)
Height range	> 3000 m ... 4000 m
Ambient temperature (operation)	-40 °C ... 48 °C
Rated insulation voltage	60 V AC/DC (Power supply, input / output)
Altitude range (≤ 5000 m)
Height range	> 4000 m ... 5000 m
Ambient temperature (operation)	-40 °C ... 42 °C
Rated insulation voltage	60 V AC/DC (Power supply, input / output)

CE
Certificate	CE-compliant
Note	and EN 61326
ATEX
Identification	 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3(1) G Ex ec nC [ia Ga] IIC T4 Gc
		 I (M1) [Ex ia Ma] I
Certificate	IBExU 07 ATEX 1069 X
UKCA Ex (UKEX)
Identification	 I (M1) [Ex ia Ma] I
		 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3 (1) G Ex ec [ia Ga] nC IIC T4 Gc
Certificate	CML 22UKEX7421X
IECEx
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex ec nC [ia Ga] IIC T4 Gc
		[Ex ia Ma] I
Certificate	IECEx IBE 08.0001X
CCC / China-Ex
Identification	[Ex ia Ga] IIC
		[Ex iaD]
		Ex nA nC [ia Ga] IIC T4 Gc
Certificate	NEPSI GYJ20.1311X
UL, USA/Canada
Identification	UL 61010 Listed
		Class I, Div. 2, Groups A, B, C, D T4
		Class I, Div. 2, Groups IIC, IIB, IIA T4
		Associated apparatus for use in Class I, Division 1, Groups A,B,C,D
		Associated apparatus for use in Class II, Div.1 Groups E,F,D
		Associated apparatus for use in Class III, Division 1
		Associated apparatus for use in Class I, Zone 0,1,2, Groups IIC,IIB,IIA
Certificate	, C.D.-No 83104549
UL, USA/Canada
Identification	Class I Div 2; IS for Class I, II, III Div 1
Identification		UL 61010 Listed
Certificate	, C.D.-No 83104549
KC-s
Identification	[Ex ia] IIC/IIB
Certificate	17-KA4BO-0410X
Shipbuilding approval
Certificate	DNV GL TAA00000AG
Safety Integrity Level (SIL, IEC 61508)
Identification	2
INMETRO
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex ec nC [ia Ga] IIC T4 Gc
		[Ex ia Ma] I
Certificate	DNV 18.0114 X
EAC Ex
Identification	 [Ex ia Ga] IIC
Identification		 [Ex ia Da] IIIC
Certificate	RU C-DE.AB72.B.00093/19
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Noise immunity	EN 61000-6-2
Noise immunity		EN 61326
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Evaluation criterion	A
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Evaluation criterion	A
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Evaluation criterion	A