MACX MCR-EX-AP-RPSS-I-IR-SP - Power/input isolating amplifier Phoenix Contact

Mã sản phẩm: 1290776

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i-Feed and input signal conditioner with 2 limit value relays, feeds 2 or 3-conductor measuring transducer, transmits 1:1 passive or active 0 mA / 4 mA ... 20 mA input signals and has 2 configurable limit value outputs. HART-transparent, Standard configuration, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Push-in connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Installation conditions influence the ambient temperature. Please refer to the “Control cabinet installation instructions”.
General	Output behavior = input signal

Product type	Repeater power supplies
Product family	MACX Analog
No. of channels	1

No. of channels	1
Electrical isolation	4-way isolation
Linearity error	≤ 0.1 %
Typical offset error	≤ 0.1 %
Signal transmission behavior	In = Out
Temperature coefficient, typical	≤ 0.1 % (10 K)
Reverse polarity protection	yes
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/power supply IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/error message output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/limit value contact IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Output/supply
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Output/limit value contact
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Output/supply/error message output
Test voltage	350 V (50 Hz, 60 s)
Supply
Nominal supply voltage	24 V DC
Supply voltage range	18 V ... 31.2 V
Power dissipation	1.5 W (R_L250 Ω)
Power consumption	2 W (20 mA)

Signal: Repeater power supply operation
Description of the input	active and passive current input, intrinsically safe
Input signal	Current
Current input signal	4 mA ... 20 mA (with HART)
Current input signal		2 mA ... 22 mA (Function area)
Short-circuit current	≤ 35 mA
Line fault detection	< 3.6 mA (Line break)
Line fault detection		> 21 mA (Short circuit)
Non-load voltage	≤ 26 V
Signal: Signal conditioner operation
Description of the input	Passive current input, intrinsically safe
Current input signal	4 mA ... 20 mA (with HART)
Current input signal		2 mA ... 22 mA (Function area)
Input resistance current input	> 250 Ω (for mA sources)
Input current	≤ 50 mA (for mA sources)
Short-circuit current	≤ 35 mA
Line fault detection	< 3.6 mA (Line break)
Line fault detection		> 21 mA (Short circuit)
Non-load voltage	≤ 26 V

Signal: Error message output
Maximum switching voltage	30 V
Max. switching current	100 mA
Switching: Relay
Contact type	2 N/O contacts
Max. switching current	≤ 170 mA (Resistive load)
Max. switching current		≤ 500 mA (≤ 1 ms)
Typical response time	< 80 ms
Typical turn-off time	< 100 ms
Signal: Repeater power supply operation
Output description	Current output (active)
Current output signal	4 mA ... 20 mA (with HART)
Current output signal		2 mA ... 22 mA (Function area)
Load	0 Ω ... 600 Ω
Output ripple (current)	≤ 40 µA (effective)
Signal: Signal conditioner operation
Output description	Signal conditioner operation
Current output signal	4 mA ... 20 mA (with HART)
Current output signal		2 mA ... 22 mA (Function area)
Load	0 Ω ... 600 Ω
Output ripple (current)	≤ 40 µA (effective)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex installation (EPL)	Gc
Ex i circuits (EPL)	Ga
		Da
		Ma
Safety data: Repeater power supply operation (2-conductor measuring transducer)
Note	With connection of measuring transducers
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Max. output voltage U_o	27 V
Max. output current I_o	87.9 mA
Max. output power P_o	574 mW
Safety-related maximum voltage U_m	253 V AC
IIB/IIIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	14 mH / 705 nF
IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	2.3 mH / 90 nF
IIB/IIIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	10 mH / 290 nF, 1 mH / 380 nF, 0.2 mH / 600 nF
IIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	1 mH / 56 nF, 0.5 mH / 72 nF, 0.2 mH / 90 nF
Safety data: Repeater power supply operation (3-conductor measuring transducer)
Note	With connection of measuring transducers
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Max. output voltage U_o	27 V
Max. output current I_o	88.3 mA
Max. output power P_o	574 mW
Safety-related maximum voltage U_m	253 V AC
IIB/IIIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	14 mH / 705 nF
IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	2.3 mH / 90 nF
IIB/IIIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	10 mH / 290 nF, 1 mH / 380 nF, 0.2 mH / 600 nF
IIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	1 mH / 56 nF, 0.5 mH / 72 nF, 0.2 mH / 90 nF
Safety data: Signal conditioner operation
Note	With connection of power sources
Input voltage U_i	30 V
Input current I_i	100 mA
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Max. output voltage U_o	4.1 V
Max. output current I_o	0 mA
Max. output power P_o	0 mW

Data communication (bypass)
Protocols supported	HART-transparent
Frequency measuring range	0.5 kHz ... 10 kHz (bidirectional HART transmission)

Status display	Green LED (supply voltage)
		LED yellow (switching state)
		Red LED (line errors)

Width	17.5 mm
Height	107.8 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0
Housing material	Polyamide (PA 6.6)

Ambient conditions
Degree of protection	IP20 (Terminal blocks)
Degree of protection		IP30 (Housing)
Ambient temperature (operation)	-40 °C ... 70 °C (Stand-alone device: any mounting position)
		-40 °C ... 48 °C (Group assembly: vertical DIN rail without circulating air)
		-40 °C ... 58 °C (Group assembly: vertical DIN rail with circulating air)
		-40 °C ... 56 °C (Group assembly: horizontal DIN rail without circulating air)
		-40 °C ... 60 °C (Group assembly: horizontal DIN rail with circulating air)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	≤ 95 % (non-condensing)

ATEX
Identification	 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
		 I (M1) [Ex ia Ma] I
IECEx
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex nA nC [ia Ga] IIC T4 Gc
		[Ex ia Ma] I
Safety Integrity Level (SIL, IEC 61508)
Identification	2