MACX MCR-EX-AP-IDS-2I-2I-LP - Output signal conditioner Phoenix Contact

Mã sản phẩm: 1291963

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i-Output isolator isolates and transmits 0 mA / 4 mA ... 20 mA signals with intrinsic safety in potentially explosive areas. Suitable for fire and gas detectors. HART-transparent, no-load voltage: 25 V, Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Accuracy, typically specified as a percentage of the measuring span (20 mA) at U_N, 23°C
General	Installation conditions influence the ambient temperature. Please refer to the operating instructions.

Product type	Output signal conditioner
Product family	MACX Analog
No. of channels	2

No. of channels	2
Electrical isolation	4-way isolation
Linearity error	≤ 0.25 % (at load = 0 Ω)
Signal transmission behavior	In = Out
Temperature coefficient, typical	≤ 0.1 % (10 K)
Reverse polarity protection	yes
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Output 1/output 2
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Input 1 / input 2
Test voltage	500 V (50 Hz, 60 s)
Supply
Supply voltage range	loop-powered, no external supply necessary
Power dissipation	≤ 0.2 W (at 20 mA, per channel)
Power dissipation		≤ 0.6 W (at 40 mA, per channel)

Signal: Current
Number of inputs	2
Current input signal	0 mA ... 20 mA
		4 mA ... 20 mA (with HART)
		0 mA ... 40 mA (Function area)
Voltage drop	1 V (constant)

Signal: Current
Output description	intrinsically safe
Number of outputs	2
Current output signal	0 mA ... 20 mA
		4 mA ... 20 mA (with HART)
		0 mA ... 40 mA (Function area)
Load/output load current output	≤ 800 Ω (20 mA)
Non-load voltage	25 V
Line fault detection	0 mA (Line break)
Line fault detection		≤ 1 mA (Input current behavior)

Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14

Ex installation (EPL)	Gc
Ex i circuits (EPL)	Ga
		Da
		Ma
Safety data
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Max. output voltage U_o	25 V
Max. output current I_o	99 mA
Max. output power P_o	613 mW
Safety-related maximum voltage U_m	253 V AC
IIA (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	28 mH / 2.97 µF
IIB (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	11 mH / 840 nF
IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	2.5 mH / 110 nF
I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	46 mH / 4.87 µF

Data communication (bypass)
Protocols supported	HART-transparent

Width	17.5 mm
Height	112.5 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0
Housing material	Polyamide (PA 6.6)

Ambient conditions
Degree of protection	IP20 (Terminal blocks)
Degree of protection		IP30 (Housing)
Ambient temperature (operation)	-20 °C ... 70 °C (Stand-alone device: any mounting position)
		-20 °C ... 70 °C (Group assembly: vertical DIN rail without circulating air)
		-20 °C ... 70 °C (Group assembly: vertical DIN rail with circulating air)
		-20 °C ... 70 °C (Group assembly: horizontal DIN rail without circulating air)
		-20 °C ... 70 °C (Group assembly: horizontal DIN rail with circulating air)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	≤ 95 % (non-condensing)

ATEX
Identification	 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3 (1) G Ex nA [ia Ga] IIC T4 Gc
		 I (M1) [Ex ia Ma] I
IECEx
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex nA [ia Ga] IIC T4 Gc
		[Ex ia Ma] I
Safety Integrity Level (SIL, IEC 61508)
Identification	3