MACX MCR-EX-AP-2T-2I-SP - Temperature measuring transducer Phoenix Contact

Mã sản phẩm: 1290849

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i-Temperature transducer, input signals from resistance thermometers in 2, 3, or 4-conductor technology, thermocouples, and mV sources are converted into active 0 mA / 4 mA ... 20 mA non Ex i signals. Standard configuration, 5-way isolation, Push-in connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Accuracy, typically specified as a percentage of the basic measuring range at U_N, 23°C
General	Installation conditions influence the ambient temperature. Please refer to the operating instructions.
General	Output behavior = 2.4 mA (0 mA ... 23 mA or “Hold last value” can be configured)
General	Sensor set via software or DIP switches
General	2-conductor comparison set via DIP switch ADJ
General	The input variables can be set via the ISpac Wizard parameterization software or DIP switches.

Product type	Temperature transmitter
Product family	MACX Analog
No. of channels	2
Configuration	Software

No. of channels	2
Electrical isolation	5-way isolation
Temperature coefficient, typical	≤ 0.1 % (10 K)
Reverse polarity protection	yes
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/power supply IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/error message output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/configuration interface IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Output 1/output 2
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Output/supply
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Output/configuration interface
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Output/supply/error message output
Test voltage	350 V (50 Hz, 60 s)
Supply
Nominal supply voltage	24 V DC
Supply voltage range	18 V ... 31.2 V
Power dissipation	≤ 1.9 W
Power consumption	≤ 1.9 W

Measurement
Description of the input	Resistance temperature detector
Sensor types (RTD) that can be used	Pt 100, Pt 250, Pt 500, Pt 1000, Pt 2000, Ni 100, Ni 500, Ni 1000, M50, M53, M100
Temperature measuring range	-200 °C ... 1100 °C (Range depending on the sensor type)
Connection technology	2-, 3-, 4-conductor
Max. permissible overall conductor resistance	50 Ω (per wire, 2-conductor circuit)
Max. permissible overall conductor resistance		100 Ω (per wire, 3-, 4-conductor circuit)
Temperature measuring range	≥ 51 K (Range depending on the sensor type)
Measurement
Description of the input	Thermocouple
Sensor types that can be used (TC)	B, E, J, K, N, R, S, T, L, U, XK
Temperature measuring range	-200 °C ... 1800 °C (Range depending on the sensor type)
Max. permissible overall conductor resistance	≤ 1000 Ω (per wire)
Temperature measuring range	≥ 36 K (Range depending on the sensor type)
Measurement
Description of the input	Potentiometer
Connection technology	3-conductor
Linear resistance measuring range	50 Ω ... 500 Ω
		0.5 kΩ ... 5 kΩ
		1 kΩ ... 10 kΩ
		10 kΩ ... 100 kΩ (with parallel 10 kΩ shunt, no wire-break monitoring)

Signal: Error message output
Maximum switching voltage	30 V
Max. switching current	100 mA
Signal: Current
Current output signal	0 mA ... 20 mA (configurable)
		4 mA ... 20 mA (configurable)
		0 mA ... 21 mA (Function area)
Load	0 Ω ... 600 Ω (per channel)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex installation (EPL)	Gc
Ex i circuits (EPL)	Ga
		Da
		Ma
Safety data
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Max. output voltage U_o	6.5 V
Max. output current I_o	19.7 mA
Max. output power P_o	32 mW (linear characteristic curve)
Safety-related maximum voltage U_m	253 V AC
IIA (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	700 mH / 1000 µF
IIB (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	330 mH / 570 µF
IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	90 mH / 25 µF
I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	700 mH / 1000 µF

Status display	Green LED (supply voltage)
Status display		Red LED (line errors)

Width	17.5 mm
Height	107.8 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0
Housing material	Polyamide (PA 6.6)

Ambient conditions
Degree of protection	IP20 (Terminal blocks)
Degree of protection		IP30 (Housing)
Ambient temperature (operation)	-20 °C ... 70 °C (Stand-alone device: any mounting position)
		-20 °C ... 40 °C (Group assembly: vertical DIN rail without circulating air)
		-20 °C ... 60 °C (Group assembly: vertical DIN rail with circulating air)
		-20 °C ... 50 °C (Group assembly: horizontal DIN rail without circulating air)
		-20 °C ... 70 °C (Group assembly: horizontal DIN rail with circulating air)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	≤ 95 % (non-condensing)

ATEX
Identification	 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
		 I (M1) [Ex ia Ma] I
IECEx
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex nA nC [ia Ga] IIC T4 Gc
		[Ex ia Ma] I