MACX MCR-EX-AP-2SD-25-35-LP - Solenoid driver Phoenix Contact

Mã sản phẩm: 1291176

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i-Solenoid driver for intrinsically safe activation of Ex i solenoid valves, alarm transmitters, or displays installed in potentially explosive areas. Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

Installation conditions influence the ambient temperature.
Please refer to the “Control cabinet installation instructions”.

Product type	Solenoid driver
Product family	MACX Analog
No. of channels	2

No. of channels	2
Electrical isolation	4-way isolation
Reverse polarity protection	yes
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Output 1/output 2
Test voltage	500 V (50 Hz, 60 s)
Electrical isolation Input 1 / input 2
Test voltage	350 V (50 Hz, 60 s)
Supply
Supply voltage range	loop-powered, no external supply necessary
Power consumption	0.5 W (+ (l_A x 37 mW/mA))

Signal: Digital
Switching level "0" signal	0 V ... 5 V
Switching level "1" signal	18 V ... 31.2 V

Switching: Digital
Output description	intrinsically safe
Typical response time	≤ 18 ms
Typical turn-off time	≤ 50 ms
Switching frequency	≤ 10 Hz

Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14

Ex installation (EPL)	Gc
Ex i circuits (EPL)	Ga
		Da
		Ma
Safety data: Highest values per output
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	1.1 nF
Max. output voltage U_o	27.6 V
Max. output current I_o	110 mA (Ex ia)
Max. output current I_o		50 mA (Ex ib)
Max. output power P_o	760 mW
Safety-related maximum voltage U_m	253 V AC
IIA (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 2.22 µF
IIB (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	9 mH / 667 nF
IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	1.2 mH / 85 nF
I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 3.5 µF
Safety data: Highest values with two outputs connected in parallel
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	2.2 nF
Max. output voltage U_o	27.6 V
Max. output current I_o	220 mA (Ex ia)
Max. output current I_o		100 mA (Ex ib)
Max. output power P_o	1520 mW
Safety-related maximum voltage U_m	253 V AC
IIA (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	25 mH / 2.22 µF
IIB/IIIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	1.8 mH / 665 nF
I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	40 mH / 3.5 µF

Status display

Yellow LED/per channel

Width	17.5 mm
Height	112.5 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0
Housing material	Polyamide (PA 6.6)

Ambient conditions
Degree of protection	IP20 (Terminal blocks)
Degree of protection		IP30 (Housing)
Ambient temperature (operation)	-20 °C ... 70 °C (Stand-alone device: any mounting position)
		-20 °C ... 50 °C (Group assembly: vertical DIN rail without circulating air)
		-20 °C ... 60 °C (Group assembly: vertical DIN rail with circulating air)
		-20 °C ... 60 °C (Group assembly: horizontal DIN rail without circulating air)
		-20 °C ... 65 °C (Group assembly: horizontal DIN rail with circulating air)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	≤ 95 % (non-condensing)

ATEX
Identification	 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3 (1) G Ex nA [ia Ga] IIC T4 Gc
		 I (M1) [Ex ia Ma] I
IECEx
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex nA [ia Ga] IIC T4 Gc
		[Ex ia Ma] I
Safety Integrity Level (SIL, IEC 61508)
Identification	3