MACX MCR-EX-AP-2REL-2DI-LP - Relay Module Phoenix Contact

Mã sản phẩm: 1292331

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i-Relay module isolates binary Ex i and non Ex i signal and control circuits, and is used for intrinsically safe activation of Ex i field currents via one changeover contact relay per channel. Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Screw connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

Installation conditions influence the ambient temperature.
Please refer to the operating instructions.

Product type	Relay Module
Product family	MACX Analog
No. of channels	2

No. of channels	2
Electrical isolation	4-way isolation
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input 1 / input 2
Test voltage	350 V (50 Hz, 60 s)
Supply
Supply voltage range	loop-powered, no external supply necessary
Power dissipation	≤ 0.4 W

Control
Description of the input	Control input, not intrinsically safe
Voltage input signal	12 V ... 31.2 V (Switching signal)
Current consumption	< 25 mA (12 V)
Current consumption		< 17 mA (24 V ... 31.2 V)

Switching: Relay
Output description	intrinsically safe
Contact type	1 changeover contact per channel
Minimum switching voltage	1 V (1 mA)
Maximum switching voltage	45 V DC (0.25 A)
		30 V DC (4 A)
		45 V AC (4 A, cos ϕ >0.7)
Typical response time	≤ 10 ms
Typical turn-off time	≤ 10 ms
Switching frequency	≤ 15 Hz

Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14

Ex installation (EPL)	Gc
Ex i circuits (EPL)	Ga
		Da
		Ma
Safety data
Input voltage U_i	45 V AC
Input current I_i	4 A
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Safety-related maximum voltage U_m	253 V AC
Safety data
Input voltage U_i	45 V DC
Input current I_i	0.25 A
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Safety-related maximum voltage U_m	253 V AC
Safety data
Input voltage U_i	30 V DC
Input current I_i	4 A
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Safety-related maximum voltage U_m	253 V AC

Width	17.5 mm
Height	112.5 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0
Housing material	Polyamide (PA 6.6)

Ambient conditions
Degree of protection	IP20 (Terminal blocks)
Degree of protection		IP30 (Housing)
Ambient temperature (operation)	-20 °C ... 70 °C (Stand-alone device: any mounting position)
		-20 °C ... 70 °C (Group assembly: vertical DIN rail without circulating air)
		-20 °C ... 70 °C (Group assembly: vertical DIN rail with circulating air)
		-20 °C ... 70 °C (Group assembly: horizontal DIN rail without circulating air)
		-20 °C ... 70 °C (Group assembly: horizontal DIN rail with circulating air)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	≤ 95 % (non-condensing)

ATEX
Identification	 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3(1) G Ex ec nC [ia Ga] IIC T4 Gc
		 I (M1) [Ex ia Ma] I
IECEx
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex ec nC [ia Ga] IIC T4 Gc
		[Ex ia Ma] I
Safety Integrity Level (SIL, IEC 61508)
Identification	2