MACX MCR-EX-AP-2F-2I-SP - Frequency transducer Phoenix Contact

Mã sản phẩm: 1290533

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i-Frequency transducer, the frequencies measured at the Ex i inputs (0.001 Hz ... 20 kHz) are output as 0 mA / 4 mA ... 20 mA non Ex i signals. Standard configuration, 5-way isolation, Push-in connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Accuracy, typically specified as a percentage of the basic measuring range at U_N, 23°C
General	Installation conditions influence the ambient temperature. Please refer to the “Control cabinet installation instructions”.
General	Use suitable cables and cable glands for applications below -20°C.

Product type	Frequency value transformer
Product family	MACX Analog
No. of channels	2
Configuration	Software

Functionality
Configuration	Software

No. of channels	2
Electrical isolation	5-way isolation
Temperature coefficient, typical	≤ 0.05 %
Reverse polarity protection	yes
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/power supply IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/error message output IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Input/configuration interface IEC/EN 60079-11
Standards/regulations	IEC/EN 60079-11
Rated insulation voltage	375 V_PP
Electrical isolation Output 1/output 2
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Output/supply
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Output/configuration interface
Test voltage	350 V (50 Hz, 60 s)
Electrical isolation Output/supply/error message output
Test voltage	350 V (50 Hz, 60 s)
Supply
Nominal supply voltage	24 V DC
Supply voltage range	18 V ... 31.2 V
Power dissipation	≤ 1.5 W
Power consumption	1.8 W

Measurement: Frequency
Description of the input	Intrinsically safe
Available input sources	in accordance with IEC/EN 60947-5-6 NAMUR
Pulse time	25 µs
Frequency measuring range	0.001 Hz ... 20000 Hz
Line fault detection	< 0.05 mA ... 0.35 mA (Line break)
Line fault detection		< 100 Ω ... 360 Ω (Short circuit)

Signal: Error message output
Maximum switching voltage	30 V
Max. switching current	100 mA
Signal: Current
Current output signal	0 mA ... 20 mA (configurable)
		4 mA ... 20 mA (configurable)
		0 mA ... 20.5 mA (Function area)
Output current with short-circuit	3.8 mA (Default setting, adjustable)
Output current with wire break	20.5 mA (Default setting, adjustable)
Load	0 Ω ... 600 Ω
Line fault detection	< 0.05 mA ... 0.35 mA (Line break)
Line fault detection		< 100 Ω ... 360 Ω (Short circuit)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex installation (EPL)	Gc
Ex i circuits (EPL)	Ga
		Da
		Ma
Safety data
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible
Max. output voltage U_o	10.5 V
Max. output current I_o	23.4 mA
Max. output power P_o	61.4 mW
Safety-related maximum voltage U_m	253 V AC
IIA (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	450 mH / 75 µF
IIB/IIIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	230 mH / 16.8 µF
IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	63 mH / 2.41 µF
I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o	600 mH / 95 µF
IIA (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 2.9 µF, 10 mH / 4.5 µF, 1 mH / 7.3 µF, 0.1 mH / 14 µF
IIB/IIIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 1.9 µF, 20 mH / 2.7 µF, 2 mH / 4.5 µF, 0.5 mH / 6.4 µF
IIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	20 mH / 0.49 µF, 5 mH / 0.67 µF, 1 mH / 0.96 µF, 0.2 mH / 1.4 µF
I (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o	100 mH / 4 µF, 10 mH / 5.7 µF, 2 mH / 7.8 µF, 0.1 mH / 17 µF

Status display	Green LED (supply voltage)
Status display		Red LED (line errors)

Width	17.5 mm
Height	107.8 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Flammability rating according to UL 94	V0
Housing material	Polyamide (PA 6.6)

Ambient conditions
Degree of protection	IP20 (Terminal blocks)
Degree of protection		IP30 (Housing)
Ambient temperature (operation)	-40 °C ... 70 °C (Stand-alone device: any mounting position)
		-40 °C ... 50 °C (Group assembly: vertical DIN rail without circulating air)
		-40 °C ... 65 °C (Group assembly: vertical DIN rail with circulating air)
		-40 °C ... 65 °C (Group assembly: horizontal DIN rail without circulating air)
		-40 °C ... 70 °C (Group assembly: horizontal DIN rail with circulating air)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	≤ 95 % (non-condensing)

ATEX
Identification	 II (1) G [Ex ia Ga] IIC
		 II (1) D [Ex ia Da] IIIC
		 II 3 (1) G Ex nA [ia Ga] IIC T4 Gc
		 I (M1) [Ex ia Ma] I
IECEx
Identification	[Ex ia Ga] IIC
		[Ex ia Da] IIIC
		Ex nA nC [ia Ga] IIC T4 Gc
		[Ex ia Ma] I