MACX MCR-EX-1TS-I-OLP-SP - Temperature measuring transducer Phoenix Contact

Mã sản phẩm: 1145207

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i-Output loop-powered temperature transducer for transmitting RTD and TC sensor signals as well as from resistance and voltage sensors via 4 mA ... 20 mA. HART, Standard configuration, Push-in connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Temperature transmitter
Product family	MACX Analog
No. of channels	1
Type	Ex i signal conditioners
Configuration	Software
Configuration		HART
Insulation characteristics
Overvoltage category	II
Pollution degree	2

No. of channels	1
Step response (0–99%)	1 s (TC)
Step response (0–99%)		1 s (RTD)
Electrical isolation Input/output
Test voltage	2 kV AC (50 Hz, 60 s)
Supply
Supply voltage range	loop-powered, no external supply necessary
Supply voltage range		11 V DC ... 30 V DC

Signal
Input signal	Temperature
Measurement
Number of inputs	1
Input voltage range	-20 mV ... 100 mV (Minimum measuring span: 5 mV)
Sensor types (RTD) that can be used	Pt, Ni, Cu sensors: 2, 3, 4-wire
Sensor types that can be used (TC)	A, B, C, D, E, J, K, L, N, R, S, T, U
Temperature measuring range	-250 °C ... 2500 °C (Range depending on the sensor type)
Temperature measuring range	≥ 10 K (RTD)
Temperature measuring range		≥ 50 K (TC)
Linear resistance measuring range	10 Ω ... 2000 Ω (Minimum measuring span: 10 Ω)

Signal: Current
Current output signal	4 mA ... 20 mA
Current output signal		20 mA ... 4 mA
Max. current output signal	23 mA
Load	(U_L - 11 V) / 0,023 A
HART coding	FSK ± 0.5 mA
HART version	7
Transmission speed	1200 Baud
Mains frequency filter	50/60 Hz
Communication resistance	≥ 250 Ω
Switch-on delay	 7 s (HART)
Switch-on delay		 7 s (Measured value)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex installation (EPL)	Gb
Ex installation (EPL)		Div. 1

Data communication (bypass)
Protocols supported	HART

Status display

LED red

Width	12.5 mm
Height	116 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-50 °C ... 100 °C
Altitude	≤ 4000 m (Above sea level)
Climatic class	B2
Permissible humidity (operation)	5 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
ATEX
Identification	 II 2 (1) G Ex ib [ia Ga] IIC T6...T4 Gb
Certificate	EPS 20 ATEX 1 166 X
IECEx
Identification	Ex ib [ia Ga] IIC T6...T4 Gb
Certificate	IECEx EPS 20.0060X
CSA
Identification	IS for Class I, Div. 2, Groups A, B, C, D; T6...T4
Identification		AIS / Class I / Div. 1 / ABCD