IOA-PSR-PS22-1NO-1NC-24DC - Coupling relay Phoenix Contact

Mã sản phẩm: 2702971

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Plug-in SIL coupling relay as an input/output accessory for VIP base module, SIL 3 high- and low-demand applications, safe-state-off, couples digital output signals to the periphery, one enabling current path, one confirmation current path, test pulse filter

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Coupling relay
Product family	PSRmini
Application	Safe switch off
		High demand
		Low demand
		Ex
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Times
Typ. starting time with U_s	150 ms (when controlled via pins 05/06)
Typical release time	30 ms (when controlled via pins 05/06)
Recovery time	500 ms

Maximum power dissipation for nominal condition	1.86 W (at U_B = 30 V DC, U_BD = 30 V DC, I_L = 9 A²)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage/insulation	Basic insulation 4 kV between all current paths and housing
Rated surge voltage/insulation		Safe isolation, 6 kV reinforced insulation from the control circuit (05/06) and diagnostics circuit (03/04/02) to the enabling current path (15/19)
Supply
Rated control circuit supply voltage U_S	19.5 V DC ... 30 V DC
Rated control circuit supply voltage U_S	24 V DC -20 % / +25 %
Rated control supply current I_S	typ. 25 mA
Power consumption at U_S	typ. 0.77 W
Inrush current	typ. 100 mA (Δt < 50 ms at U_s)
Filter time	max. 3 ms (at pins 05/06 in the event of voltage dips at U_s)
		max. 3 ms (at pins 05/06; low test pulse width)
		≥ 50 ms (at pins 05/06; low test pulse width)
		max. 17 ms (at pins 05/06; high test pulse width)
		≥ 600 ms (at pins 05/06; high test pulse width)
Diagnostic supply voltage U_D	24 V DC -20 % / +25 % (at pin 04)
Input current at U_D	7 mA (at pins 04/03 for U_D; + 100 mA depending on load at pin 02)
Inrush current at U_D	typ. 200 mA (Δt < 1 ms; at pins 04/03 for U_D)
Protective circuit	Surge protection; 35 V suppressor diode (pins 05/06)33 V suppressor diode (pins 04/03)35 V suppressor diode (pins 02/03)
Protective circuit		Polarity reversal protection for rated control circuit supply voltage and diagnostic supply voltage

Relay: Enabling current path
Output description	safety-related N/O contacts
Number of outputs	1 (undelayed)
Contact type	1 enabling current path
Contact material	AgSnO₂
Switching voltage	min. 12 V AC/DC
Switching voltage		max. 230 V AC/DC (Observe the load curve)
Switching capacity	min. 60 mW
Inrush current	min. 3 mA
Inrush current		max. 3 A
Switching capacity in accordance with IEC 60947-5-1	3 A (24 V (DC13))
Switching capacity in accordance with IEC 60947-5-1		3 A (230 V (AC15))
Limiting continuous current	3 A (observe derating)
Sq. Total current	9 A² (observe derating)
Mechanical service life	10x 10⁶ cycles
Output fuse	3 A gL/gG
Relay: Confirmation current path
Output description	Safety-related N/C contacts
Number of outputs	1 (undelayed)
Contact type	1 confirmation current path
Contact material	AgCuNi, + Au
Switching voltage	min. 19.2 V DC
Switching voltage		max. 30 V DC
Switching capacity	min. 20 mW
Inrush current	min. 1 mA
Inrush current		max. 100 mA
Limiting continuous current	100 mA
Output fuse	150 mA Fast-blow

Connection technology
pluggable	yes
Conductor connection
Connection method	Pluggable onto VIP base module

Status display

2 x LED bi-color (green, red)

Width	10 mm
Height	75 mm
Depth	112 mm

Housing material

PA 6.6

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4
Performance level (PL)	e
Safety data: EN 50156-2
Safety Integrity Level (SIL)	3 (Reference IEC 61508)
Safety data: IEC 61508 - High demand
Designation	Readback of the N/C contact (pins 04/02)
Equipment type	Type A
Safety Integrity Level (SIL)	3 (< 15% of the overall SIL)
Safe Failure Fraction (SFF)	99.99 %
MTBF	24.4 Years
λ_SU	3095.43 FIT
λ_SD	0 FIT
λ_DU	0.12 FIT
λ_DD	5.69 FIT
Probability of a hazardous failure per hour (PFH_D)	1.00 x 10^-9
Proof test interval	240 Months
Duration of use	240 Months
Designation	Error acknowledgment via 05/06 pins to the DO (diagnostic coverage of DO ≥ 99 %)
Equipment type	Type A
Safety Integrity Level (SIL)	3 (< 15% of the overall SIL)
Safe Failure Fraction (SFF)	99.99 %
MTBF	24.4 Years
λ_SU	3095.43 FIT
λ_SD	0 FIT
λ_DU	0.12 FIT
λ_DD	5.69 FIT
Probability of a hazardous failure per hour (PFH_D)	1.00 x 10^-9
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Designation	Readback of the N/C contact (pins 04/02)
Equipment type	Type A
Safety Integrity Level (SIL)	3 (< 15% of the overall SIL)
Safe Failure Fraction (SFF)	99.84 %
MTBF	25.74 Years
λ_SU	2866.78 FIT
λ_SD	0 FIT
λ_DU	4.45 FIT
λ_DD	0 FIT
Probability of a hazardous failure on demand (PFD_AVG)	1.5 x 10^-4
Probability of a hazardous failure on demand (PFD_AVG)		1.95 x 10^-5
Proof test interval	75 Months
Duration of use	240 Months
Designation	Error acknowledgment via 05/06 pins to the DO (diagnostic coverage of DO ≥ 99 %)
Equipment type	Type A
Safety Integrity Level (SIL)	3 (< 15% of the overall SIL)
Safe Failure Fraction (SFF)	99.92 %
MTBF	25.74 Years
λ_SU	2860.79 FIT
λ_SD	0 FIT
λ_DU	2.13 FIT
λ_DD	8.32 FIT
Probability of a hazardous failure on demand (PFD_AVG)	1.5 x 10^-4
Probability of a hazardous failure on demand (PFD_AVG)		8.01 x 10^-5
Proof test interval	56 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-40 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15 g (in the event of continuous stress caused by shock, contact reactions are possible.)
Vibration (operation)	10 Hz ... 150 Hz, 2g

ATEX
Identification	 II 3G Ex_nA nC IIC T4 Gc
Certificate	Sira 17ATEX4293X
IECEx
Identification	Ex nA nC IIC T4 Gc
Certificate	IECEx SIR 17.0078X
CE
Certificate	CE-compliant

Air clearances and creepage distances between the power circuits
Standards/regulations	EN 60664-1, EN 60079-15

Mounting type	Plug-in mounting
Assembly instructions	See derating curve
Mounting position	vertical or horizontal
Connection method	Pluggable onto VIP base module