FA MCR-HT-TS-I-OLP - Head-mounted transducer Phoenix Contact

Mã sản phẩm: 1105515

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Output loop-powered head transmitter for transmitting up to 2 sensor signals from RTD and TC sensors as well as from resistance and voltage sensors via 4 mA ... 20 mA. HART, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 2, Systematic Capability: 3, Screw connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Temperature transmitter
Product family	Field Analog
No. of channels	2
Configuration	Software
Configuration		HART
Insulation characteristics
Overvoltage category	II
Pollution degree	2

No. of channels	2
Step response (0–99%)	0.8 s (TC)
Electrical isolation Input/output
Test voltage	2 kV AC (50 Hz, 60 s)
Supply
Supply voltage range	loop-powered, no external supply necessary
		11 V DC ... 42 V DC (Standard)
		11 V DC ... 32 V DC (SIL active)

Measurement
Number of inputs	2
Input voltage range	-20 mV ... 100 mV (Minimum measuring span: 5 mV)
Sensor types (RTD) that can be used	Pt, Ni, Cu sensors: 2, 3, 4-wire
Sensor types that can be used (TC)	A, B, C, D, E, J, K, L, N, R, S, T, U
Temperature measuring range	-250 °C ... 2500 °C (Range depending on the sensor type)
Temperature measuring range		-200 °C ... 850 °C (Pt 100)
Temperature measuring range	> 10 K (RTD)
Temperature measuring range		> 50 K (TC)
Linear resistance measuring range	10 Ω ... 2000 Ω (Minimum measuring span: 10 Ω)

Signal: Current
Current output signal	4 mA ... 20 mA (HART)
Current output signal		20 mA ... 4 mA (HART)
Max. current output signal	23 mA
Load	(U_B – 11 V) / 0.023 A
HART coding	FSK ± 0.5 mA
HART version	7
Transmission speed	1200 Baud
Mains frequency filter	50/60 Hz
Communication resistance	≥ 250 Ω
Switch-on delay	 10 s (HART)
Switch-on delay		 28 s (Measured value)

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.35 Nm

Ex installation (EPL)	Gc
Ex installation (EPL)		Div. 2

Data communication (bypass)
Protocols supported	HART

Ambient conditions
Degree of protection	IP00 (upon installation in field housing IP66/67, NEMA 4X)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (operation)		-40 °C ... 70 °C (SIL active)
Ambient temperature (storage/transport)	-50 °C ... 100 °C
Altitude	≤ 4000 m (Above sea level)
Climatic class	C1
Permissible humidity (operation)	5 % ... 95 % (condensation permitted)

CE
Certificate	CE-compliant
ATEX
Identification	 II 3G Ex nA IIC T6...T4 Gc
UL, USA/Canada
Identification	UL 61010 Recognized
FM
Identification	NI / Class I / Div. 1, 2 / Group ABCD T6/T5/T4
CSA
Identification	NI, Class I, Div. 2, Groups A, B, C, D
Shipbuilding approval
Certificate	DNV GL TAA00002GX
Safety Integrity Level (SIL, IEC 61508)
Identification	2
Systematic Capability
Identification	3
DNV GL data
Temperature	D
Humidity	B
Vibration	B
EMC	B
Enclosure	C