FA MCR-EX-HT-1TS-I-OLP - Head-mounted transducer Phoenix Contact

Mã sản phẩm: 1145217

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Ex i-Output loop-powered head transmitter for transmitting RTD and TC sensor signals, as well as from resistance and voltage sensors via 4 mA ... 20 mA. HART, Standard configuration, Screw connection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Temperature transmitter
Product family	Field Analog
No. of channels	1
Configuration	Software
Configuration		HART
Insulation characteristics
Overvoltage category	II
Pollution degree	2

No. of channels	1
Step response (0–99%)	1 s (TC)
Step response (0–99%)		1 s (RTD)
Electrical isolation Input/output
Test voltage	2 kV AC (50 Hz, 60 s)
Supply
Supply voltage range	loop-powered, no external supply necessary
Supply voltage range		10 V DC ... 30 V DC (Ex)

Measurement
Number of inputs	1
Input voltage range	-20 mV ... 100 mV (Minimum measuring span: 5 mV)
Sensor types (RTD) that can be used	Pt, Ni, Cu sensors: 2, 3, 4-wire
Sensor types that can be used (TC)	A, B, C, D, E, J, K, L, N, R, S, T, U
Temperature measuring range	-250 °C ... 2500 °C (Range depending on the sensor type)
Temperature measuring range	≥ 10 K (RTD)
Temperature measuring range		≥ 50 K (TC)
Linear resistance measuring range	10 Ω ... 2000 Ω (Minimum measuring span: 10 Ω)

Signal: Current
Current output signal	4 mA ... 20 mA (HART)
Current output signal		20 mA ... 4 mA (HART)
Max. current output signal	23 mA
Load	(U_L - 10 V) / 0.023 A
HART coding	FSK ± 0.5 mA
HART version	7
Transmission speed	1200 Baud
Mains frequency filter	50/60 Hz
Communication resistance	≥ 250 Ω
Switch-on delay	 7 s (HART)
Switch-on delay		 7 s (Measured value)

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm

Ex installation (EPL)	Ga
Ex installation (EPL)		Div. 1
Ex i circuits (EPL)	Gb
Ex i circuits (EPL)		Div. 1

Data communication (bypass)
Protocols supported	HART

Ambient conditions
Degree of protection	IP00 (upon installation in field housing IP66/67, NEMA 4X)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-50 °C ... 100 °C
Altitude	≤ 4000 m (Above sea level)
Climatic class	C1
Permissible humidity (operation)	5 % ... 95 % (condensation permitted)

CE
Certificate	CE-compliant
ATEX
Identification	 II 1G Ex ia IIC T6...T4 Ga
Certificate	EPS 20 ATEX 1 166 X
IECEx
Identification	II 1G Ex ia IIC T6...T4 Ga
Certificate	IECEx EPS 20.0060X
UKCA Ex (UKEX)
Certificate	CML 21UKEX21009X
CSA
Identification	IS for Class I, Div. 1, Groups A, B, C, D; T6...T4
Identification		Ex ia IIC T6...T4 Ga