EV-T2M3SO12-4P-BL-SET - Infrastructure charging socket Phoenix Contact

Mã sản phẩm: 1268355

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

CHARX connect modular, Infrastructure charging socket, square, Basic, Set, with square protective cover, with LED (common cathode connection), for charging electric vehicles (EV) with alternating current (AC), Type 2, IEC 62196-2, 32 A / 480 V (AC), without single-core wires, locking actuator: 12 V, 4-pos., Rear panel mounting, M5 thread, housing: black, PHOENIX CONTACT logo

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Design (Infrastructure charging socket)	square
Design (Protective cover)	square
Design (Protective cap)	circular
Product type	Infrastructure charging socket
Product family	CHARX connect modular
Application	for charging electric vehicles (EV) with alternating current (AC)
Application		compatible with infrastructure charging plugs
Type	Basic
Type		Set
Design	with square protective cover
Design		with LED (common cathode connection)
Compatibility	The square basic protective cover version included in this set is not compatible with the shutter. Choose a set with a premium and/or round protective cover version for this.
Locking type	Locking in the inserted state with a locking mechanism
Affixed logo	PHOENIX CONTACT logo
Charging standard	Type 2
Charging mode	Mode 3, Case B

Type of signal transmission	Pulse width modulation
Note on the connection method	Connection via spade connector, separable and reconnectable
Type of charging current	AC 3-phase
Charging power rating	22 kW
Charging power	max. 26.6 kW
Charging current	max. 32 A
Power contact
Number	5 (L1, L2, L3, N, PE)
Rated voltage	480 V AC
Rated current	32 A
Signal contact
Number	2 (CP, PP)
Rated voltage	30 V AC
Rated current	2 A
LED function
Application	to display the charging status
Position	in the frame of the protective cover
Connection type	common anode
Locking actuator
Operating voltage	12 V
Note number of positions	4-pos.
Position of the locking actuator	top center
Locking actuator
Operating voltage	12 V
Note number of positions	4-pos.
Position of the locking actuator	top center
Possible power supply range at the motor	9 V ... 16 V
Maximum voltage for locking detection	30 V
Typical motor current for locking	0.2 A
Reverse current of the motor	max. 1 A
Max. dwell time with reverse current	1000 ms
Recommended adaptation time	600 ms
Pause time after entry or exit path	3 s
Service life insertion cycles	> 10000 load cycles
Lock recognition	available
Mechanical emergency release	available
Ambient temperature (operation)	-30 °C ... 50 °C
Cable length	0.5 m
Cable structure	4 x 0.5 mm²

Infrastructure charging socket
Dimensional drawing
Width	75 mm
Height	91.71 mm
Depth	87.95 mm
Protective cover
Dimensional drawing
Width	84.9 mm
Height	93.7 mm
Depth	30.5 mm
Bore dimensions
Dimensional drawing
Width	60 mm
Height	60 mm
Protective cap
Width	64 mm
Height	57 mm
Depth	24 mm

Color (Housing)	black (9005)
Color (Protective cover)	black (9005)
Material (Housing)	Plastic
Material (Protective cover)	Plastic
Material (Contact surface)	Silver

Cable type	without single-core wires
Single wire, cross section	6.00 mm²
Single-core wires for locking actuator
Cable length	0.5 m
Cable structure	4 x 0.5 mm²
Single wire, material	PVC
Single wire, color	BU/RD, BU/GN, BU/YE, BU/BN
External cable diameter	1.6 mm ±0.20 mm
Cable resistance	≤ 37.1 Ω/m

Type of cover movement	Self-locking
Mechanical data
Insertion/withdrawal cycles	> 10000
Insertion force	< 100 N
Withdrawal force	< 100 N

Ambient conditions
Degree of protection (Infrastructure charging socket)	IP44 (plugged in)
Degree of protection (Protective cover)	IP54
Ambient temperature (operation)	-30 °C ... 50 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	5000 m (above sea level)

Standards
Standards/regulations	IEC 62196-2

Mounting type Infrastructure charging socket	Rear panel mounting (0 to 90 degree frontal inclination possible)
Mounting type Protective cover	Rear panel mounting
Max. wall thickness	max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Max. wall thickness		max. 29 mm (Rear panel mounting, normative maximum specification for infrastructure charging plug when using protective cover 1164297)
Mounting hole diameter	7.00 mm (ø)
Fixing screws	M5 thread
Screws included in the scope of delivery	none