EV-T1HPCC-DC500A-5,0M50ECBK11L - DC charging cable Phoenix Contact

Mã sản phẩm: 1085642

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with charging connector holder, with replaceable mating face frame, with left-hand angled panel feed-through, with variable-speed fan, with digital temperature sensors, HPC CCS type 1, SAE J1772, IEC 62196-3-1, PHOENIX CONTACT logo, cable: 5 m, black, straight

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	DC charging cable
Product family	CHARX connect professional
Application	for charging electric vehicles (EV) with direct current (DC)
Application		for installation at charging stations for electromobility (EVSE)
Type	HPC DC charging cable
Type		with cooled vehicle charging connector and cooled cable
Design	with charging connector holder
		with replaceable mating face frame
		with left-hand angled panel feed-through
		with variable-speed fan
		with digital temperature sensors
Technology	Combined Charging System
Technology		High Power Charging
Affixed logo	PHOENIX CONTACT logo
Label	8.9 mm x 28.9 mm (customer logo on request)
Charging standard	HPC CCS type 1
Charging mode	Mode 4
Cooling system
Cooling	in the vehicle charging connector and in the cable
Coolant	50% water, 50% glycol (Glysofor N)
Cooling capacity	600 W (Cable length: 3 m)
		800 W (Cable length: 4 m)
		900 W (Cable length: 5 m)
		1050 W (Cable length: 6 m)
Cooling hose diameter	1x 11.5 mm Supply hose
Cooling hose diameter		2x 8.8 mm Return hoses
Flow rate	2 l/min
Operating pressure	1.00 bar ... 2.00 bar
Relief pressure	2.00 bar
Maximum permissible pressure	4.00 bar
Flow temperature	15 °C
Communication interface	CAN bus for reading the temperature and leakage sensor data
Communication interface		Digital output for determining the functional status of the vehicle connector
Fan
Cooling	The fan provides additional cooling inside the panel feed-through to increase the charging current.
Cooling		The fan can be attached to the panel feed-through as an option.
Cable structure	2 x AWG 26
Nominal voltage U_N	24 V
Nominal voltage range	18 V AC ... 24 V AC
Fan speed indication	4400 min-1
Mechanical service life	70.000 h (at 40 °C)
Ambient temperature	-20 °C ... 40 °C

Type of signal transmission	Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121
Note on the connection method	Crimp connection, cannot be disconnected
Coding	480 Ω (Lever actuated)
Coding		150 Ω (Lever not actuated)
Temperature monitoring	2x NTC (replaceable, front DC contacts)
		2x NTC (DC power wires inside)
		Pt 1000
Type of charging current	DC
Charging power	500 kW
Charging current	500 A
Power contact
Number	3 (PE, DC+, DC-)
Rated voltage	1000 V DC
Rated current	500 A
Signal contact
Number	2 (CP, PP)
Rated voltage	30 V AC
Rated current	2 A
Temperature sensors (NTC)
Sensor type	NTC
Attachment point	2 sensors for the replaceable front DC contacts
Attachment point		2 sensors for the internal DC power wires
Switch-off temperature	90 °C
Temperature sensors (Pt 1000)
Sensor type	Pt 1000
Standards/regulations	DIN EN 60751
Attachment point	Sensor in the panel feed-through
Switch-off temperature	90 °C ±1 K (equivalent to a Pt 1000 value of 1346.5 Ω)
Long-term stability	0.06 % (after 1000 hours at 130 °C)
Recommended measured current	1 mA (1 V at 0°C)
Coefficient	3850 ppm/K
Ambient temperature	-50 °C ... 130 °C (Operation)

Vehicle charging connector
Dimensional drawing	Make sure that the vehicle charging connector is placed in an appropriate charging connector holder, which ensures a minimum protection rating of IP24 in accordance with IEC 61851-1, for the entire time between charging. To create this charging connector holder, use the dimensions of the vehicle charging connector. Detailed dimensions can also be found in the Download area.
Width	69.6 mm
Height	192.6 mm
Depth	284.6 mm
Panel feed-through
Dimensional drawing
Width	80 mm
Height	82 mm
Depth	215.5 mm
Cooling fan
Dimensional drawing
Width	81 mm
Height	133 mm
Depth	115 mm
Bore dimensions
Dimensional drawing	Drill hole spacing
Width	55 mm
Height	55 mm
Diameter	60 mm

Color (Housing)	black (9005)
Color (Handle area)	black (9005)
Color (Mating face)	black (9005)
Color (Cable)	black (9005)
Color (Panel feed-through)	black (9005)
Material (Vehicle charging connector)	Plastic
Material (Cable outer sheath)	EVM-1 in accordance with EN 50620
Material (Panel feed-through)	Plastic
Material (Contact surface)	Silver
Flammability rating according to UL 94	V0 (Mating face)

Cable length	5 m ±45 mm
Wiring standards/regulations	Based on UL 62 (File E515623, Vol 1)
Wiring standards/regulations		Based on IEC 62893
Cable weight	max. 1938 kg/km
Cable type	straight
Cable structure	5 x 25 mm² + 7 x 0.75 mm²
External cable diameter	35.7 mm ±0.4 mm
Outer sheath, material	TPE-U in accordance with IEC 62893-1
Stripping length of the sheath	250 mm ±5 mm
Cable resistance	≤ 0.00078 Ω/m (based on a power core, at an ambient temperature of 20°C)
Bending radius	min. 357 mm (10x diameter)

Mechanical data
Insertion/withdrawal cycles	> 10000
Insertion force	< 75 N
Withdrawal force	< 75 N

Ambient conditions
Degree of protection (Vehicle charging connector)	IP54 / Type 3R (The degree of protection is only ensured in the ready and plugged-in state when both plug-in components are original products from Phoenix Contact or suitable standard-compliant products.)
Degree of protection (Panel feed-through)	IP54
Ambient temperature (operation)	-30 °C ... 40 °C
Ambient temperature (operation)		max. 55 °C (Current reduction required, observe the DC contact temperature limit value of 90°C)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	5000 m (above sea level)

Standards
Standards/regulations	SAE J1772
		IEC 62196-3-1

Mounting type Panel feed-through	Rear panel mounting
Mounting type Fans	Rear panel mounting (optional for increasing the charging current up to 500 A)
Max. wall thickness	max. 5 mm
Fixing screws	M5x16