EV-PLCC-AC1-DC1 - DC charging controller Phoenix Contact

Mã sản phẩm: 1624130

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Programmable charging controller for DC and AC charging of electric vehicles in accordance with IEC 61851-1,-23, DIN SPEC 70121, and CHAdeMO, with integrated cellular modem

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Digital
Number of digital inputs	16
Connection method	COMBICON connectors
Description of the input	EN 61131-2 type 1
Input voltage range	-0.5 V DC ... 30 V DC
		-0.5 V DC ... 5 V DC (“0” signal)
		15 V DC ... 30 V DC (“1” signal)
Typical response time	min. 3 ms
Cable length	max. 30 m

Resistance to permanent reverse voltage	max. 500 mA
Digital
Connection method	COMBICON connectors
Number outputs	16
Output voltage	24 V DC
Maximum output current per channel	500 mA
Switching
Output name	AC charging locking system
Maximum output current	max. 2 A
Maximum output voltage	12 V DC (Internal supply)

Battery

Integrated (rechargeable battery buffered)

Conductor connection
Connection method	COMBICON connectors
Conductor cross section rigid	0.08 mm² ... 1.5 mm²
Conductor cross section flexible	0.08 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16

Interface	Ethernet (2x)
Wireless
Interface description	3G / 2G
Note	Hardware revision 02 or later
Frequency	900 MHz (GSM/GPRS/EDGE )
		1800 MHz (GSM/GPRS/EDGE )
		850 MHz (UMTS/HSPA (Class 3))
		1900 MHz (UMTS/HSPA (Class 3))
		2100 MHz (UMTS/HSPA (Class 3))
Connection method	SMA (female)
Impedance	50 Ω
Antenna	max. cable length of 30 m
SIM Interface	1.8 volt and 3 volt SIM card
GPRS	Class 12, Class B
EDGE	Multislot Class 10
UMTS	HSPA 3GPP R6
Protocols supported	OCPP 1.6J (Core-Profile)
Wireless
Interface description	4G / 2G
Note	Hardware revision 04 or later
Frequency	900 MHz (GSM/GPRS/EDGE )
		1800 MHz (GSM/GPRS/EDGE )
		800 MHz (LTE B20)
		900 MHz (LTE B8)
		1800 MHz (LTE B3)
		2100 MHz (LTE B1)
		2600 MHz (LTE B7)
		700 MHz (LTE B28)
Connection method	SMA (female)
Impedance	50 Ω
Antenna	max. cable length of 30 m
SIM Interface	1.8 volt and 3 volt SIM card
GPRS	Class 12, Class B
EDGE	Multislot Class 10
LTE	CAT1, CAT4
Protocols supported	OCPP 1.6J (Core-Profile)
DC charging
Standards/regulations	IEC 61851-1
Standards/regulations		IEC 61851-23
Charging mode	Mode 4
Communication	DIN SPEC 70121
Cable length	max. 10 m
Proximity	Analog input, reserved for future applications
Temperature sensors	2x Pt 1000
Temperature range	-20 °C ... 120 °C
Relay output	DC charging enabled
Maximum switching voltage	30 V (External supply)
Max. switching current	6 A (External supply)
AC charging
Standards/regulations	IEC 61851-1, Annex A+B
Charging mode	Mode 3, Case B + C
Locking control	Relay output, supplied internally
Locking feedback	Resistance measurement
Voltage	± 12 V
Maximum current for locking actuators	2 A
Activation time	Can be set via application program
Behavior in the event of voltage drop	Automatic unlocking
Switching thresholds	Can be set via application program
Temperature sensors	1x Pt 1000 (evaluation via application program)
Temperature range	-20 °C ... 120 °C
Relay output	AC charging enabled
Maximum switching voltage	30 V (External supply)
Max. switching current	6 A (External supply)
RS-485
Interface	RS-485 2-wire
Connection method	COMBICON connectors
Number of interfaces	2
Transmission length	max. 3 m (with shielded cable max. 30 m)
Termination resistor	120 Ω (Can be connected internally)
RS-232
Interface	RS-232
Connection method	COMBICON connectors
Number of interfaces	2
Transmission length	max. 3 m (with shielded cable max. 30 m)
Ethernet
Interface	Ethernet
Connection method	RJ45 jack
Number of interfaces	2
Transmission speed	100 Mbps
Transmission length	max. 100 m
CAN-Bus
Interface	CAN bus
Connection method	COMBICON connectors
Number of interfaces	1 (Transparent mode, CAN 2.0a, 11 Bit Object Identifier, CAN 2.0b, 29 Bit Object Identifier)
Transmission speed	500 kbps (Default)
Transmission speed		125 kbps, 250 kbps, 1000 kbps (adjustable)
Transmission length	max. 3 m (with shielded cable max. 30 m)
Termination resistor	120 Ω (Can be connected internally)

Supply
Supply voltage U_L	24 V DC
Supply voltage range U_M	24 V DC -15 % / +20 % (in accordance with EN 61131-2)
Residual ripple, in reference to the measured value	5 %
Segment circuit supply U_S	24 V DC -15 % / +20 % (in accordance with EN 61131-2)
Current consumption from U_M	max. 8 A DC
Current consumption from U_S	max. 8 A DC
Power supply at U_L	max. 0.8 A DC
Power supply at U_M	max. 8 A DC (sum of U_M+ U_S)
Power supply at U_S	max. 8 A DC (sum of U_M+ U_S)
Real-time clock
Realtime clock	Yes
Supply
Supply voltage	24 V DC (Length of cable max. 30 m)
Supply voltage range	19.2 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)

Product type	DC charging controller
Product family	CHARX control professional
Application	Programmable charging controller for DC and AC charging of electric vehicles in accordance with IEC 61851-1,-23, DIN SPEC 70121, and CHAdeMO, with integrated cellular modem
Operating mode	Stand-Alone
		Client
		Server

Width	285.00 mm
Height	158.00 mm
Depth	70.00 mm

Mounting type	DIN rail mounting
Assembly instructions	DIN rail mounting
Mounting position	horizontal

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (according to DIN EN 61131-2, non-condensing, no ice formation)
Permissible humidity (storage/transport)	10 % ... 95 % (in accordance with EN 61131-2)
Shock (operation)	25g (Criterion 1, according to IEC 60068-2-27)
Vibration (operation)	5g
Vibration (storage/transport)	5g
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above mean sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above mean sea level)

Standards
Standards/regulations	IEC 61851-23
		DIN SPEC 70121
		CHAdeMO V1.1

Conformance with EMC directives	Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Electrostatic discharge (ESD)EN 61000-4-2/IEC 61000-4-2 Criterion B, 4 kV contact discharge, 8 kV air discharge
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Electromagnetic fieldsEN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Fast transients (burst)EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Transient overvoltage (surge)EN 61000-4-5/IEC 61000-4-5 Criterion B, Supply lines: 1 kV, Signal/data lines: 0,5 kV
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Conducted interferenceEN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
		Noise emission test in accordance with EN 61000-6-4/IEC 61000-6-4 EN 55011 Class A