EMG 17-REL/KSR-W230/21-21-LC - Relay Module Phoenix Contact

Mã sản phẩm: 2940430

Relay module, with soldered-in miniature switching relay, contact (AgNi): medium to large loads, 2 changeover contacts, input voltage 230 V AC

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

General	Only available as AC voltage version.
Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Relay Module
Product family	EMG
Application	Universal
Operating mode	100% operating factor
Mechanical service life	approx. 5x 10⁷ cycles
Insulation characteristics
Insulation	Basic insulation
Insulation		Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Basic insulation
Insulation		Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths
Overvoltage category	II
Pollution degree	2
Insulation characteristics: Air clearances and creepage distances between input and contact circuit (or output contact current path)
Insulation	Safe isolation, reinforced insulation
Overvoltage category	III
Pollution degree	2

Maximum power dissipation for nominal condition	0.92 W
Test voltage (Winding/contact)	4 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact)	1 kV AC (50 Hz, 1 min., changeover contact/changeover contact)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	260 V AC
Rated surge voltage	2.3 kV
Air clearances and creepage distances between input and contact circuit (or output contact current path)
Rated insulation voltage	260 V AC
Rated surge voltage	6 kV

Switching
Contact type	2 changeover contacts
Type of switch contact	Single contact
Drive and function	monostable
Drive (polarity)	polarized
Contact material	AgNi
Maximum switching voltage	250 V AC/DC
Limiting continuous current	5 A
Maximum inrush current	6 A
Interrupting rating (ohmic load) max.	120 W (at 24 V DC)
		95 W (at 48 V DC)
		60 W (at 60 V DC)
		40 W (at 110 V DC)
		55 W (at 220 V DC)
		1250 VA (for 250 V AC)

Coil side
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Contact side
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12

Ambient conditions
Ambient temperature (operation)	-20 °C ... 40 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C

Air clearances and creepage distances between the power circuits
Standards/regulations	EN 50178
Air clearances and creepage distances between input and contact circuit (or output contact current path)
Standards/regulations	EN 50178
Standards/regulations
Standards/regulations	EN 61810-1