EMD-FL-RP-480 - Monitoring relay Phoenix Contact

Mã sản phẩm: 2900177

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Monitoring relay for active power monitoring in 1- and 3-phase networks of 0…7.2 kW, underload, overload, window, motor winding temperature, error memory, supply voltage can be selected via power module, 2 changeover contacts

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Real power monitoring relay
Operating mode	100% operating factor
Mechanical service life	approx. 2x 10⁷ cycles
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Service life electrical	2x 10⁵ cycles at ohmic load, 1000 VA
Mains type	1 and 3-phase
Rated insulation voltage	300 V
Rated surge voltage	4 kV
Supply
Supply voltage range	110 V AC ... 500 V AC (see Power modules)
Nominal power consumption	3.5 VA (3 W)

Input name	Measuring input
Description of the input	Voltage input
Measured value	AC sine (10 Hz ... 400 Hz)
Nominal input voltage U_N	480 V (3 N ~ 480/277 V)
Input voltage range	0 V AC ... 480 V AC (1(N) ~, single-phase load)
Input voltage range		0 V AC ... 480 V AC (3(N) ~, 3-phase load)
Maximum input voltage	550 V AC (/3~550/318)
Input current range	0.15 A ... 6 A (Range: 0.75 kW and 1.5 kW)
Input current range		0.3 A ... 12 A (Range: 3 kW and 6 kW)
Overload capacity	12 A permanent
Input resistance of voltage input	1.25 MΩ
Input resistance current input	< 10 mΩ
Frequency range	48 Hz ... 63 Hz (see Power modules)
Maximum temperature coefficient	≤ 0.02 %/K
Setting range for response delay	0.1 s ... 50 s
Setting range for starting delay	1 s ... 100 s
Min. setting range	5 % ... 110 % (of P_N)
Max. setting range	10 % ... 120 % (of P_N)
Response value	≥ 3.6 kΩ (Relay drops out)
Function	Underload
		Overload
		Window
		Error memory
		Winding temperature monitoring
Basic accuracy	± 2 % (of scale end value)
Setting accuracy	≤ 5 % (of scale end value)
Repeat accuracy	± 2 %
Total cold resistance	< 1.5 kΩ
Release value	≤ 1.8 kΩ (Relay picks up)
Recovery time	500 ms
Flow interruption
Measuring ranges 0.75 kW and 1.5 kW	150 mA
Measuring ranges 3 kW and 6 kW	180 mA
Current flow detection
Measuring ranges 0.75 kW and 1.5 kW	300 mA
Measuring ranges 3 kW and 6 kW	360 mA
Control
Function	Error memory (bridge Y1-Y2)
Load capacity	No
Conductor length Y1-Y2	max. 10 m (twisted)
Reset	N/C contact in supply circuit
Wave form
AC Sinus	10 Hz ... 400 Hz
Sinus-evaluated PWM	10 Hz ... 100 Hz

Switching
Contact type	2 floating changeover contacts
Maximum switching voltage	250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.	750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
Interrupting rating (ohmic load) max.		1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse	5 A (fast-blow)

Connection method	Screw connection
Stripping length	8 mm
Conductor cross section rigid	0.5 mm² ... 2.5 mm²
Conductor cross section flexible	0.25 mm² ... 2.5 mm²
Conductor cross section AWG	20 ... 14

Width	45 mm
Height	90 mm
Depth	113 mm

Housing insulation material

Polyamide PA, self-extinguishing

Ambient conditions
Degree of protection (Housing)	IP40 (Housing)
Degree of protection (Connection terminal blocks)	IP20 (Connection terminal blocks)
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (operation)		-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport)	-25 °C ... 70 °C
Climatic class	3K3 (in acc. with EN 60721)
Permissible humidity (operation)	15 % ... 85 %