EMD-FL-PF-400 - Monitoring relay Phoenix Contact

Mã sản phẩm: 2885809

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Monitoring relay for load monitoring (cos ϕ = 0,1…1) in 1- and 3-phase networks, underload, overload, window, error memory, wide range power supply unit, 2 changeover contacts

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Load monitoring relay
Operating mode	100% operating factor
Mechanical service life	approx. 2x 10⁷ cycles
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Service life electrical	2x 10⁵ cycles at ohmic load, 1000 VA
Mains type	1 and 3-phase
Rated insulation voltage	300 V
Rated surge voltage	4 kV
Supply
Supply voltage range	24 V AC ... 240 V AC -15 % ... +10 %
Supply voltage range		24 V DC ... 240 V DC (-20 % ... +25 %)
Type of supply voltage	AC/DC
Nominal power consumption	4.5 VA (1.5 W)

Input name	Measuring input
Measured value	AC sine (10 ... 100 Hz)
Nominal input voltage U_N	3 N ~ 415/240 V
Input voltage range	40 V AC ... 415 V AC (1(N) ~, single-phase load)
Input voltage range		40 V AC ... 415 V AC (3(N) ~, 3-phase load)
Maximum input voltage	3 N ~ 500/289 V
Input current range	0.5 A ... 10 A (Connection terminal blocks: L1i and L1k)
Overload capacity	12 A permanent
Input resistance of voltage input	≥ 1 MΩ
Input resistance current input	5 mΩ
Min. switching threshold cos φ	0.1 ... 0.99
Max. switching threshold cos φ	0.2 ... 1
Frequency range	48 Hz ... 400 Hz
Maximum temperature coefficient	≤ 0.1 %/K
Setting range for response delay	0.1 s ... 40 s
Setting range for starting delay	1 s ... 100 s
Function	Underload
		Overload
		Window
		Error memory
Basic accuracy	± 5 % (At cos φ = 0.8)
Setting accuracy	≤ 5 % (At cos φ = 0.8)
Repeat accuracy	± 1.8 %
Recovery time	500 ms

Switching
Contact type	2 floating changeover contacts
Maximum switching voltage	250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.	750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
Interrupting rating (ohmic load) max.		1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse	5 A (fast-blow)

Connection method	Screw connection
Stripping length	8 mm
Conductor cross section rigid	0.5 mm² ... 2.5 mm²
Conductor cross section flexible	0.25 mm² ... 2.5 mm²
Conductor cross section AWG	20 ... 14

Width	22.5 mm
Height	90 mm
Depth	113 mm

Housing insulation material

Polyamide PA, self-extinguishing

Ambient conditions
Degree of protection (Housing)	IP40 (Housing)
Degree of protection (Connection terminal blocks)	IP20 (Connection terminal blocks)
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (operation)		-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport)	-25 °C ... 70 °C
Climatic class	3K3 (in acc. with EN 60721)
Permissible humidity (operation)	15 % ... 85 %

CE
Certificate	CE-compliant
UL, USA/Canada
Identification	UL/C-UL Listed UL 508

Low Voltage Directive	Conformance with Low Voltage Directive
Noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4