ECOR-4-BSC2/4X21 - Relay base Phoenix Contact

Mã sản phẩm: 1157947

ECOR-4 relay base, for power relay with 4 changeover contacts, ring cable lug screw connection, for mounting on NS 35/7.5

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

General	Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
General	The outputs are not suitable for switching different outer conductors with appropriate switching output (applies to the AC optocoupler variants and relays).
General	The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
General	At least a basic level of insulation is maintained against adjacent modules in the DIN rail direction. If the application has higher requirements on the insulation (reinforced insulation), then these must be realized through suitable measures (e.g. partition plates).
General	Any unused screw connections have to be tightened with torque.

Product family	ESSENTIAL edition
Operating mode	100% operating factor
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage	4 kV

Nominal input voltage U_N

≤ 230 V AC/DC

Connection method	Screw connection
Conductor cross section rigid	0.5 mm² ... 2.5 mm²
Conductor cross-section rigid (2 conductors with same cross section)	0.5 mm² ... 2.5 mm² (with ferrule)
Conductor cross section flexible	0.5 mm² ... 2.5 mm²
Conductor cross section flexible (2 conductors with same cross section)	0.5 mm² ... 2.5 mm² (with ferrule)
Tightening torque	1.2 Nm

Ambient conditions
Degree of protection	IP20 ()
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m